|
#1
|
|||
|
|||
![]()
Anyone has SC6 setup hints for astro?
|
#2
|
||||
|
||||
![]()
One of the problems with a new car is that setups aren't readily available.
Had 2 runs with mine and it's very promising. My current setup (still need a bit of work but it works) is: Mid motor No anti squat spacer 30 deg front block Short links at front Med links rear 550cst oil front 400 rear Saddle pack 1 deg camber all around 4mm droop limit spacers on front 2mm rear. Reversed rack Rest as per manual. As a starting point should work ok. |
#3
|
|||
|
|||
![]()
Thank you charlesk, sounds like a good starting setup!
![]() |
![]() |
|
|