|
#1
|
|||
|
|||
What do I need??
Hi just bought the car below and other than Losi shocks (got) rudebits brass weight kit is there anything else I need to put on this X6 squared.
http://www.oople.com/forums/showthre...429#post269429 Any help would be great thanks |
#2
|
|||
|
|||
CustomBlitz sprayed bodyshell? lol
Looks like you have a tidy complete setup there big fella
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#3
|
|||
|
|||
Excellent........
Was hoping someone would say that (Shock oil arrived this morning we are rocking) |
#4
|
|||
|
|||
You'll have to speak to ye olde Haggis and ask him what oil to run with the X6, and if we need to put any limiters in the shocks before we build em on Friday mate
Should be along the lines of 40wt, red pistons, blue springs on the front and 30wt, orange pistons and pink springs for the rear
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#5
|
|||
|
|||
Think I've seen somewhere 35/32.5 front with black springs and red pistons with 30/27.5 rear with pink and red pistons. Ordered those o rings as well
|
#6
|
|||
|
|||
Good lad. Those NorTech whities are the nuts
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#7
|
|||
|
|||
can you PM me your address bud putting bits in post for you deleted other PM cheers
|
#8
|
||||
|
||||
We pretty much always start off with 32.5/35wt with a red piston up front and 25wt red piston in the rear.
I havent run anything heavier in the rear since i ran nimhs |
#9
|
|||
|
|||
Losi shock oil set (20 upto 50) arrived today so I'll start with 25 you reckon in the rear. Going to go Rudebits kit as well though will that matter.
Tony if your reading this have you got one there ready for posting buddy ? |
#10
|
|||
|
|||
I dont think Tony is about at the moment, I believe he is on holiday......
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#11
|
|||
|
|||
Ok thanks Darren, anything I might need on this car buddy??
|
#12
|
|||
|
|||
Get it on the track and drive it mate..........
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#13
|
|||
|
|||
Fair enough, best put some electrics in it then
|
#14
|
||||
|
||||
Neither have i thats always what i start with. with 25 in the rear it feels very soft but it works lol
__________________
|
#15
|
|||
|
|||
Of coarse a Phat Bodies Zen bodyshell and front wing makes all the difference
|
#16
|
||||
|
||||
Got to be done, you seen my shell at the weekend Scott rather than the X6 boat
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#17
|
||||
|
||||
Quote:
|
#18
|
||||
|
||||
|
#19
|
|||
|
|||
Oh you are a gent....
When it goes outside, sutle changes or big changes?? |
#20
|
||||
|
||||
Change ride height, move front axles down and move rear shocks to inside hole on wishbone if tracion is low. Maybe 25 weight rear oil if traction is very low.
|
|
|