|
#1
|
||||
|
||||
![]()
Hi all
Does anyone know if the esc comes with a fan and sensor lead? Also I will be running with Savox servos and spektrum radio gear. Has anyone had problems using this esc with this combo? Cheers Dave |
#2
|
||||
|
||||
![]()
You could ask MB models but from what my friend got from him you don't have either in the box, only esc, manual and wires.
Awesome speedo. |
#3
|
||||
|
||||
![]()
Got both in mine, sensor lead is 14.5cm
Not used my savox with it as i switched to sanwa radio & servo
__________________
A rc car is not just for christmas, it's for life
|
#4
|
||||
|
||||
![]()
The VXX Comes with wires and fan, but without sensor lead!
I've not heard of any problems when used with Savox servos and Spektrum radio's. Hope this helps MB |
#5
|
||||
|
||||
![]()
Hi all,
Sorry I didn't really know where to post this, so id thought id post it here. I've been getting a problem with my speed controller I believe it to be the problem. What happens is; when I use my transmitter to accelerate, the motor sometimes starts turn and other times it doesn't. Now I thought it might of been the receiver, so I brought a new one and I'm still getting the problem. Then I thought it may of been the motor, so I had it apart to check for damage or a build up of crap. The motor seems fine as well, I even soldered a different older motor with the speedo and it worked at first, then I switched it off and It wouldn't even accelerate. I've even changed the sensor wire as I though it was that. Any ideas of what it could be? Or anybody has a similar issue before? The Speedo controller and motor are both less than 3 months old, and im just getting no drive from my motor. I'm getting very frustrated so if anyone could help that would be great. Thanks in advance. |
![]() |
|
|