b4 tool set wanted

[ryan 2008]

i am going to buy a b4 buggy and i need a tool set .what sizes do i need i have seen some fastrax tools sets will they all fit all the screw on the b4. and what tool do i need to get the wheels off .
the tool set i have seen sizes are 050.1.16.5/64 .3/32 will they work

[ryan_93]

you will need -

Hex Drivers:
.050"
5/64"
1/16"
3/32"

Nut Drivers:
3/16"
1/4"
11/32" (rear wheel nuts)

Ryan

[ryan 2008]

thanks mate can you get them in sets 1 set for the car. and a set for the wheels any link please must be cheap

[ryan 2008]

thanks ryan found a set for the car just need to find a set for the wheels
nut drivers
3/16"
1/4"
11/32"
anybody got a link for any. are the just for the wheels or the car as well

[Mike Hudson]

the 1/4 and 3/16 are for severall nuts around the car but the 11/32 is just for the rear wheels

[ryan 2008]

thanks do you know were i can get some cheap hex drivers and wheel nut drivers

[ryan_93]

These are what i use -

http://www.cmldistribution.co.uk/cml...tId=0000003019

http://www.cmldistribution.co.uk/cml...tId=0000003020

[ryan 2008]

these tools are more than what i payed for the car i need cheap nut drivers

[ryan 2008]

anybody know were i can get any cheap nut drivers

[yellen]

http://www.liquidrc.com/index.php?ze...=&dto=&x=0&y=0

I use these.

[ryan 2008]

need some tools before next friday coming. so need to be in the uk

[sosidge]

It's hard to find cheap imperial tools in the UK.

Do you have the plastic Associated tools that come with the kit. They are rubbish, but they are cheap. #6956 is the part number - not to say that they will be any easier to find than a cheap set of proper tools though.

[ryan 2008]

i have found some b4 nut drivers dynmite tool .and some hex drivers inperial fastrax .thanks for the help guy i am only 14 years old and trying to start racing. but i got told i am to young for racing

[sparrow.2]

Originally Posted by ryan 2008

...but i got told i am to young for racing

Whoever told you that was probably scared you'd be quicker than him soon

14 is plenty old enough! I know as I get overtaken by plenty of kids

If you need tools try putting a wanted add in the small adds section on the bottom of the main page. Someone always has a spare set to let go.

[ryan 2008]

i have tried ,they wanted £85 for tools. what i paid for the car was £100 for a rtr brushless 5.5turn ezrun and all carbon and loads of spare for a couple of years