SP GT2.0 Question ( punch)

[losichris]

Struggling to get any punch from my car, have LRP 6200 Lipo's ( not old) and SP 6.5
Good top speed, but quite sluggish!
Do i need to program my esc on the computer if i want to activate punch profiles?? if so whats connection??
Or are there other methods?

Any help would be great

[ian h]

Originally Posted by losichris

Struggling to get any punch from my car, have LRP 6200 Lipo's ( not old)
Good top speed, but quite sluggish!
Do i need to program my esc on the computer if i want to activate punch profiles?? if so whats connection??
Or are there other methods?

Any help would be great

You only need pc to change software on the esc. You should be able to adjust punch via the program card.

[/tobys]

use the LCD programming box that came with the speedo.

if punch (DDRS?) is down at 1-3, it might feel soft. switch it up to 6-7 and see if it feels better.

make sure you press the button to save the change!

[losichris]

Originally Posted by /tobys

use the LCD programming box that came with the speedo.

if punch (DDRS?) is down at 1-3, it might feel soft. switch it up to 6-7 and see if it feels better.

make sure you press the button to save the change!

Ive got that set on 8


How do i access the settings 12-15 in the manual?

[/tobys]

you need to be running the stock software on the speedo, which will require a PC and the paid-for LCD programming box.

what is your timing set at? and what motor is it?

[losichris]

Originally Posted by /tobys

you need to be running the stock software on the speedo, which will require a PC and the paid-for LCD programming box.

what is your timing set at? and what motor is it?

its a SP 6.5 , not sure on the timing settings, what should i have ?

[/tobys]

try setting it full/max and see if it makes a difference. I run a SP 6.5 in 2wd with max timing and punch set to 7.

i would leave the motor timing position as standard.