|
|
#1
|
||||
|
||||
SV2 Setup Thread
Stick all your SV2 setup's in here
__________________
A rc car is not just for christmas, it's for life
|
#2
|
|||
|
|||
Where find Simon Moss SV2 set up at Stotfold????
|
#3
|
|||
|
|||
Stotfold Setup attached guys.
Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC |
#4
|
|||
|
|||
Si or Tom, are you guys removing the plastic spacer from underneath the rear camber plate and then adding shims in its place or are you running the plastic spacer and shims together under the plate ???
I've noticed a few people that are not sure on this, when looking on the setup sheets the plastic spacer is highlighted but we are not sure if that means replaced or added too with shims. Thanks
__________________
Martyn Kyosho | Team Orion | Sanwa | Rudebits | Proline |
#5
|
|||
|
|||
I dont run the plastic washer, so the shims are only under the rear ball stud. Not sure what Tom does tho.
Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC |
#6
|
|||
|
|||
Great, thanks Si
__________________
Martyn Kyosho | Team Orion | Sanwa | Rudebits | Proline |
#7
|
||||
|
||||
Astro outdoor multi surface bumpy high grip
Any of the team have a set up for southport outdoors using bigbores as i need a starting point somewhere near that works already
Cheers Mark
__________________
Wots up doc |
#8
|
|||
|
|||
I ran my stotfold setup at the top of this thread at southport on Sunday. Mine was pretty good.
Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC |
#9
|
|||
|
|||
I ran my stotfold setup at the top of this thread at southport on Sunday. Mine was pretty good.
Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC |
#10
|
||||
|
||||
Thanks si
1 more question were did you put the weight you added Mark
__________________
Wots up doc |
#11
|
||||
|
||||
Grass set up
Hi. Has anybody got a setup for grass
|
#12
|
|||
|
|||
Leon, try the simon moss oswestry national setup on Petit rc
__________________
Kyosho Speed Passion |
#13
|
|||
|
|||
Spare ball studs
Are there any spare ballstuds in the sv2 kit? I just got mine and while assembling, realised that one of the ballstuds in step10 package is unthreaded.
|
#14
|
||||
|
||||
Afraid not, contact schumacher with a picture of the ball stud and they will get you a few sent out; their customer service is spot on!
|
#15
|
|||
|
|||
Would you believe it? Moving on through the build, I come to the turnbuckle for the chassis top plate and realised that the ball end/cup won't bite n screw in. So I put my nail on the thread and turn the turnbuckle and my nail stayed at the same place! The threads are just circles around the shaft. It doesn't corkscrew!
This is becoming such a disappointing buy. I have always looked at Schumacher as a premium brand and when I could actually afford one and finally purchased a kit, I find these QC issues. *sigh* Not something I would expect of Schumacher. Other brands, yes... Definately not Schumacher. |
#16
|
||||
|
||||
Quote:
__________________
___________________________ Neil Adamson |
#17
|
|||
|
|||
Quote:
|
#18
|
|||
|
|||
setup for telford model car club??
Has anyone got a setup for telford model car club please?
|
#19
|
|||
|
|||
sv2 grass and indoor carpet set up sheets
hi there, anyone out there go a set up sheet for an sv2 on grass and indoor carpet.
cheers |
|
|