|
|
#1
|
||||
|
||||
Gearing for a Losi 7.5T brushless on a B4
Can someone advise on the above. I assume it'll be like a 12 x brushed motor
|
#2
|
||||
|
||||
23 pinion to start? standard spur?
Does it give any recommendations for overall ratio in the manual? If so it can be worked out by: Spur/pinion ration = external ratio External Ratio x Gearbox ration = overall ratio... e.g. 81/23 = 3.52 3.52 x 2.6:1 = 9.12 (overall ratio!) HTH Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#3
|
||||
|
||||
Drop onto the Associated website and view/download the build manual... suggested ratios are near the back of the manual...
__________________
Don't believe the hype... Think for yourself.. |
#4
|
||||
|
||||
Ive started off with a 18tooth with the standard spur and see how it goes. The manuals always seem to have really high gearing. better to let her rev than getting hot.
westw00d
__________________
LB Racing ~ RCBearings ~ RCDisCo~ SMD |
#5
|
||||
|
||||
Quote:
Interesting thought, I might dig out a 19/20 pinion and see how it goes. Got to wire it in tonight and then replace the radio gear tomorrow with a 2.4Ghz Helios |
#6
|
||||
|
||||
I'm on 24/87 in the X-6 (same thing) and am thinking of going up to 25.
Brushless get too hot if under-geared also G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#7
|
||||
|
||||
Well I geared my 7.5 x11 81/24 and it ran very well, maybe a bit too quick.. Will see what happens this weekend at the track
|
|
|