|
|
#1
|
||||
|
||||
Titchfield Setups
An area to post and discuss set-ups for TORCH.
|
#2
|
||||
|
||||
hiya all here is the setup on my car from the morning practise
front 3 hole pistons drilled to 55 32.5 wt oil losi old grey springs 17.5mm ball cup no limiters inside but o-ring on outside tower middle wishbone middle ride height drive shafts just below level track 1mm with bw brace for strengh 10 degree hubs with castle removed to lower outer ballstud 10 degree wishbone mount longest camber link with 0mm washer on inside and no washers outside 10 mm space on steering link 1 degree of camber 0 toe in/out rear 3 hole 54 pistons 27.5 oil losi old red/brown springs ful lenth turnbukle ball cup with non threads showing no limiters outside or inside tower middle wishbone inside (hole replicated on rear of wishbone) rideheight driveshafts level wheel base, long (dry) short (wet) rear bulkhead altered with 2 extra holes drilled directly above the originals, (send me an email addy so i can send you pics) 1mm washer on rear mount 0 on front mount (you will have to dremel the top of the front of the wishbone so it doesnt rub against the purple alloy mount and bind up the suspension) shocks mounted in kit position the wishbone, ( if monted on the rear, this numbs the car down so you can add more steering to it and makes it better across the bumps) 3 degrees of toe in camberlink longest inside and middle on hub. 3mm washers on inner plate aditional info diffs both in low position overdrive pulley on front stiff chassis used solid 4wd high speed internal ratios used 5.5 on 22-23/83 40c 5300 lipos sp gt2.0 pro any questions feel free to ask
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#3
|
||||
|
||||
That is a proper in depth set up, damn i wish i had a Cat SX.
__________________
Schumacher Cougar Laydown Hobbywing Xr10 Pro - Savox -Much More - Sanwa SURREY AND HANTS RADIO CONTROLLED CAR CLUB - SHRCCC |
#4
|
||||
|
||||
Nathan, thats brilliant, thanks for taking the time to do that.
Matt |
#5
|
||||
|
||||
Holy Crap, based purely on Mr Ralls in depth set-up, I may purchase an SX especially
__________________
Answer RC SWorkz 35-3 SWorkz 350T SWorkz S12-2 Instagram: crazylthirteen Blogger: http://the-croucher.blogspot.co.uk/ |
#6
|
||||
|
||||
that is the best comment i think i have ever heard about one of my setups . if any of you need any further help feel free to ask. i shall be posting other setups on her shortly for x6 etc
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#7
|
||||
|
||||
I ran my Cougar at TORCH for the 1st time last weekend and ended up the highest placed Cougar. I will post a full setup when I return from holiday but will list the main points for you below.
Shocks, front. 5 hole pistons 35WT oil 4.5 spring. Rear. 5 hole pistons 30WT oil 2.5 spring. Tyres, stagger rib fronts. Yellow mini spike rear. -2.0 Deg camber front and back. Front wishbones reversed, medium wheel base setting (try running in long wheel base to start with). As I say when I return from holiday I will post a full setup sheet. Feel free to PM me any questions, James. Quote:
|
#8
|
||||
|
||||
What setups are people using on the new track? Shall we get this thread lively again?
22 setup? |
#9
|
||||
|
||||
Setup is used on ansmann mad monkey. Best so far 11laps 310.5
Front tyre yellow stagger on cut down monkey wheel. No insert. Shocks. Ansmann xpro alloy body. 2 hole piston. 20wt oil. Spring. Xpro black(feel very similar to team c hard spring -red) Mounting - top inner hole on tower , bottom inner hole on wishbone. Camber -2 degrees Top link - inner hole on tower. Outer hole on c hub. 5mm between collar and end of shock body Rear tyre yellow minispike blue insert on STD rat rear wheels Shocks as above 25 wt oil Spring as above Mounting tower inner wbone outer Camber -2 degrees Top link inner top outer top outside 6mm pre load on spring. 50 grams lead on servo Basically kit settings other than shocks and weight. |
#10
|
||||
|
||||
Hi all
just need a little help i'm going to run my madrat this sunday at torch and need a little help with gearing cheers Ginge
__________________
Reality Racing - Team Associated - Savox - CML |
#11
|
||||
|
||||
I run 21t pinion with the standard spur - 6.5 motor.
|
#12
|
|||
|
|||
Mad Rat set up etc
Hello all.
This is my first post on this site and new to RC cars and/or my 6 year old son. A couple of weeks ago you was kind enough to let my son on the track after racing had finished, he had a great time didn't crash too much, the car is standard as it came out the box. The car had tyres issues. My first question is can you recommend tyres ( front and back) suitable for this surface/track someone did mention Schumacher yellow or blue would these be mini spike? my 2nd question I tried to set the car up as per the manufactures instruction but I have been told the car is not set up right (not enough toe in) I would be grateful is you can give me a rough guide of what is a good basic set up (if there is such thing a basic setup) toe-in/out camber angle, spring setting, diff , clutch etc. etc. I have seen a set up for a x-pro car but didn’t give information on toe settings Thank you in advance for any help you can offer Ian |
#13
|
||||
|
||||
Quote:
http://www.oople.com/forums/forumdisplay.php?f=81
__________________
Build it, brake it, make it, Race it. SX2 B4.1 Cougar sv2 RC10 Gold tub |
#14
|
|||
|
|||
Deano thanks for advice got some Schumacher and gave it a try (should say my son) on Sunday made a big difference
|
#15
|
||||
|
||||
My setup from Last sunday If anyone is interested!
In the morning when it was a touch damp I ran Dboots Multibite's (B) compound on rear, then went to Schu Yellows after round 2 I think... DEX210: http://i237.photobucket.com/albums/f...tupSheet-1.jpg |
#16
|
|||
|
|||
anyone fancy sharing their set up for a sx3 please ??
|
#17
|
||||
|
||||
Quote:
I tried pasting it onto a word document and enlarging it but it just came out blurred. Thanks.
__________________
My feedback thread: http://www.oople.com/forums/showthread.php?t=169737 |
|
|