|
|
#1
|
||||
|
||||
Using a 540 in mod heat?
Hi, i was wondering if you are allowed to race 540 motors in a 2wd mod heat as i've bust my brushless stuff?
Cheers |
#2
|
|||
|
|||
Hi, yes you can use your 540 motor in the mod. class.
Mike. |
#3
|
||||
|
||||
Quote:
I have used a 540 in 2wd mod several times it is still possible to be competitive, depending a bit on the track layout. |
#4
|
||||
|
||||
ok cheers guys, will be there next meeting.
|
#5
|
||||
|
||||
What about the other way round? As a 540 racer, I notice a few others useing brushless systems. What's the definitive rule on this?
|
#6
|
||||
|
||||
Brushless is fine. The motor is supposed to be 13.5t or something. Mike will know the rules better than me.
__________________
|
#7
|
||||
|
||||
Hang on a second Col, that's not my understanding, at least on champ nights.
13.5 brushless (or whatever the 540 version is) would perform better than the basic sealed can things currently used. I think Mike Riley used one last time out and it flew along (when Ben drove it anyway ) Surley the object of the 540 class is that people can compete on equal terms on a budget. If people start splashing out on brushless systems and fancy lipos it will put other people off racing. |
|
|