|
|
#1
|
|||
|
|||
What ball diff drops in the b6.1
I just bought the b6.1 and want to know what ball diffs drop in?
Do the older versions from the b6 or even the b5m fit? This is my first associated buggy so not too clued up. |
#2
|
|||
|
|||
B6 ball diff fits yeah not sure about b5 though
|
#3
|
|||
|
|||
|
#4
|
||||
|
||||
YZ-2 diff also fits
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#5
|
||||
|
||||
Does fit straight in with out modding.
__________________
I live with fear everyday....sometimes she lets me race!!!! Schumacher F1..The original KF. TLR 5.0 AC .. FORSALE |
#6
|
|||
|
|||
B5 ball diff fits but it needs to be shimmed up on both sides to stop the sideways movement. think it's 1 mm on each side.
I got an avid shim kit from MB and it works perfect. 5 washers each side between the diff and the bearing, then the height adjuster.
__________________
#allhailthebbt |
#7
|
||||
|
||||
Quote:
As for B5 diffs they should go in with bearing spacers in place as per the gear diff fitting in a B6. |
#8
|
||||
|
||||
Just to add to this I am pretty sure that B6 diff I had left over is 1mm narrower than the new B6.1 diff, I had the alloy cover AS91464 fitted and needed a 1mm shim to fit in my T6.1
The out-drives and internals on the B6.1 diff do not cross over to the B6 diff.
__________________
|
#9
|
|||
|
|||
Really. I thought it was a bit of a let down compared to I the older one. Plastic cross pin and diff case while the older one had alloy parts as standard.
|
#10
|
||||
|
||||
Quote:
I've had no issues at all with either the plastic cross pin or the plastic cover. No leaks, smooth as silk, no sign of changing over a run. Perfect as far as I'm concerned. |
|
|