|
|
#1
|
||||
|
||||
![]()
Does anyone have any experience of using acetone to remove Schumacher Silver tyres? I've got a new set on pin drive wheels but now use hex drive wheels and wonder if they'll go all funny in the process.
Cheers, Ian
__________________
Dragon Paints |
#2
|
||||
|
||||
![]()
Yeah they shrink and go rock solid! Don't bother trying :-)
__________________
John Jones --SMD--INSIDE LINE MODELS--PR RACING UK-- My feedback http://www.oople.com/forums/showthread.php?t=79696 |
#3
|
||||
|
||||
![]()
I heard exactly the same story as John is describing. Instead, you might want to consider boiling them in water for a few hours
![]() |
#4
|
||||
|
||||
![]()
I always boil my tyres off rims and can say for sure they won't take hours to boil the glue away. If you keep the wheel submerged the glue will come away within about 45 mins to an hour.
Be careful pulling the tyre away from the rim once boiled especially with silver compounds as they could easily tear. Being careful I've removed silver compound tyres before using this method. Chris
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
#5
|
||||
|
||||
![]()
Have you tried baking them?
|
#6
|
|||
|
|||
![]()
Some compounds boil off fine, some don't. I tried to boil off schumacher cut staggers in green and they went all warped.
__________________
Ardgay Models Schumacher CORE-RC Hobbywing Mark One Designs |
![]() |
|
|