|
|
#1
|
||||
|
||||
22-4 2.0 Rear Hubs - Confused
Getting a bit confused with what I need for when. Could anyone advise the part numbers for the hubs I need in low and high grip? Also do I need different length driveshafts or anything like that?
I currently have some on the car ( see picture) that I assumed were 22.3 hubs, however I also purchased some spare 22.3 hubs (see picture) and the seem slightly different. Any help gratefully received |
#2
|
||||
|
||||
The hub with the driveshaft is the current hub for low grip which has 0mm axle height, TLR234088 are the hubs we use almost always as these are the +3mm axle height versions.
The hub on the right is off the 22 2.0 and isn't used on any of the cars. As for the driveshafts you only need the kit 68mm ones.
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#3
|
||||
|
||||
Thank you very much, really appreciated
|
|
|