|
|
#1
|
|||
|
|||
PRS1V3FM Type R Schumacher Wheel Hex Offsets
Hi All.
Does anyone know what size hexs (front & rear) are required in order to maintain the same dimensions as the kit PR wheels when using schumacher wheels. It's for convenience as the clubs I race at sell schumacher wheels in pre glued format. Many Thanks Stew |
#2
|
|||
|
|||
I don't know personally, but ping the question to Kev Lee at Inside Line Racing, he should know.
|
#3
|
|||
|
|||
What was the answer on this one please guys?
I've just bought a used V3 FM, need to stick up on wheels and tyres but I'm told they're a different fitting to standard schuey? |
#4
|
|||
|
|||
Hi did anyone get the answer to this? Just bought a s1v3 type r and unsure what wheels would fit. Specially needing for carpet racing
|
#5
|
|||
|
|||
After a few months with the Type R, I'm able to say that the Schumacher rims are very close to the PR rims when using the hexes that come with the 2018 Type R kit. I've not felt the need to try any different offset.
I'm not sure if the hexes that come with the PRs1v3FM are the same though. Also, I did need to ream the front Schumachers ever so slighly as the front axles were a little wider. Stew |
#6
|
|||
|
|||
After a few months with the Type R, I'm able to say that the Schumacher rims are very close to the PR rims when using the hexes that come with the 2018 Type R kit. I've not felt the need to try any different offset.
I'm not sure if the hexes that come with the PRs1v3FM are the same though. Also, I did need to ream the front Schumachers ever so slighly as the front axles were a little wider. Stew |
|
|