30 inch brushless boat project

[grovehead]

here is a project ive been doing for the past 2 weeks , its a 30 inch nqd hydroplane which ive completly stripped out and doing a brushless conversion .
ive removed all the motors and both shafts
ive fitted a 100amp water cooled esc ,alloy motor mount , traxxas waterproof servo and rudder
it also has twin water cooling for the motor and esc and bronze prop
ive got a 2000kv motor and 330mm flexishaft on its way which is all thats needed to start the testing
here are a few pics it still needs the paint job finishing off which i will do tomorrow