|
#1
|
||||
|
||||
![]()
Hi all. I received my tc02c evo conversion kit on Friday. I want to list all the problems I have had with it and ask people's thoughts.
1, the spur gear cover needed dremeling at the bottom to fit and there's a chunk of plastic missing from it where I presume it was moulded. 2, the gearbox halves don't go together at all. I had to dremeled the underside of it to clear my motor as when the gearbox is mounted, my team powers motor doesn't fit between the gearbox and the chassis. The first idler gear rubbed on the layshaft bearing because the layshaft bearing doesn't sit flush in the moulding. If I tighten up the gearbox, the layshaft can't be turned. 3, the motor plate was scratched. 4, the diff when tightened up and sealed is very stiff. I bought it from inside line racing who are always helpful and I'll call them in the morning and let them know. I also want want to add I am very experienced and no newbie to Rc racing so i know how to build correctly. I know it's not a expensive conversion but I don't think that it should mean faults like this are acceptable. Last edited by adey; 14-09-2014 at 05:33 PM. Reason: Additional |
|
|