|
#201
|
||||
|
||||
Put it all back together and all seems fine with the driveshaft ....
Anyway, reason for post, Tamiya ball studs are also an option for reducing bump steer, I've used some of their low profile types off the touring cars on both ends of the steering links and they sit very low (its the type with no external hex, but where you put the allen key in the centre of the ball, hope that makes sense) and reduce the issue. I've also taken the spindles right down to the centreline, still seem strong enough as they stayed in one piece when the turnbuckle snapped! |
#202
|
|||
|
|||
Yes Dave, that makes sense. It's similar to the Yokomo ball stud where you use a 2.0 mm allen driver to put it in. The tamiya ball stud will hold up well.
|
#203
|
||||
|
||||
More good progress today using your ideas guys, thanks
Bumpy oswestry track, tried the losi springs as suggested (red rear, green front) and also dropped to 25wt oil in the back (30wt in the front) and it was easily the best its felt! Also took a 2nd row of spikes off the outside of the front tires (plus a row off the inside) and a row of the rear outside too, and it enabled me to drive much more aggressively! Looking forward to Eden park next week! |
#204
|
||||
|
||||
Quote:
__________________
Email: sales@insidelineracing.co.uk www.insidelineracing.co.uk PR Racing UK Facebook Page |
#205
|
||||
|
||||
Hello Kevin
It is met with the GP of Belgium you my lent your foret.pourait you gave me settings final GP of Belgium and the Championship of Europe 2008 Thank you roromarie@wanadoo.fr |
#206
|
||||
|
||||
Quote:
these are my settings from the GP and Euros.... hope it helps Front piston - 667 oil 37.5 spring losi green short link on hub long link on tower (with addition hole drilled 1.8mm lower than top hole) shock - outside on wishbone shock - inside on tower wishbones level Rear Piston - 556 oil 30 spring - losi white shock position - middle on wishbone, middle on tower middle link on hub short link on tower (1/4 from bottom) wheelbase - long on hub/ middle on inner pin 2 degree toe in blocks (soon to be released) Wishbones level 2 x 1.5mm washers under squate plate Extras 5.5 sintered on 22/87 25gramms of lead in rear pocket cut down camberlink ballcup on rear shocks for increased droop front one-way x-2000s and taper pins For the Belgium GP it was the same as above but with 32.5 oil front and rear and the front shocks on the inside wishbone hole. I also used cut down losi silver springs on the front. Tyres were yellow mini pins with inner outer row cut off on the rear and 3 inner/ 3 outer on the front.
__________________
Email: sales@insidelineracing.co.uk www.insidelineracing.co.uk PR Racing UK Facebook Page |
#207
|
||||
|
||||
Thank you is very nice
A tu news on the release date of the new rear refused because sella'm strongly Aero does not respond to mail items that we are that this is normal? |
#208
|
||||
|
||||
T'inquiete pas trop, Bob et Danny ont eu beaucoup a faire avant l'euro et avec Kampenhout. J'ai vu les nouvelle piece pour le toe-in et elles sont bien belles! La voiture est apparament beaucoup mieux avec, specifiquement sur la glisse! Sur l'accroche c'est mieux aussi. A Kampenhout la bagnolle de KevLee avez l'aire planté!
|
#209
|
||||
|
||||
Hi Sparrow,
Can you translate to English, if it was about the new rear toe in blocks, I wouldn't mind knowing when they're available and have had the same email issues with them? |
#210
|
||||
|
||||
I was just saying that they probably had a lot to do in the runup to Kampenhout and the euros. The new hub carriers with 2,5° and 4° do a lot for the car's handling, especially on slick tracks.
Kev's car looked really good at the GP! |
#211
|
||||
|
||||
Yeah I'm really looking forward to them coming out, I'm hoping some rear toe in will let me be more aggressive on the throttle in corners!
|
#212
|
||||
|
||||
Oh GP of Belgium had already Kevin's new play, and I can not find it planted
|
#213
|
||||
|
||||
Hi there,
It is now one month I drive my Aero A-one, it is really nice and fast, i thank you very much for all setup you gave. At the moment I have a very big problem to have parts. Last time I have driven on a very treaky track with very big jump. The problem is that lots of chassis have been broken, and mine to! I had an extra one but nearly broke it again !. I reenforced rear end with specific parts. I really tried hard to get a new order, mail (tried all we had in web site , phone, even postal mail nobody answer, it is getting boring... Any one has a solution for me ? (before selling the car of course) |
#214
|
||||
|
||||
Email or contact The Raceplace they have stock and should be able to help you.
__________________
X Factory UK - Team Corally - DMS Racing - Tuning Haus - Exotek - Avid - Alpha - JConcepts
|
#215
|
||||
|
||||
Thank you for this information, I will do that if Aero doesnt answer.
|
#216
|
||||
|
||||
My problem is that quantity in stock says 0
I am obliged to wait Aero to decide answering mails. |
#217
|
||||
|
||||
Email John at the raceplace direct...
The website crashed a little while ago and hasn't been updated properly since. He has plenty of Aero spares.... we have also sent Aero a message for you, they was having problems with there server.
__________________
X Factory UK - Team Corally - DMS Racing - Tuning Haus - Exotek - Avid - Alpha - JConcepts
|
#218
|
|||
|
|||
sorry for the website quantity being wrong, i have updated it now and a full update will be done after southport.
john
__________________
www.theraceplace.co.uk |
#219
|
||||
|
||||
Thank you for helping me.
|
#220
|
||||
|
||||
Hello Kevin
Little you to me given the adjustments which you did have has Talywain? With you of the news for the production of fused back which you had in Belgium? I will want order a certain number of pair of Aero piston to be able pierced with the diameters losi but it still does not answer the email has you news? So long roromarie@wanadoo.fr |
Thread Tools | |
Display Modes | |
|
|