|
#2861
|
||||
|
||||
Quote:
I use the 11x14 shim sets for the diff, if that's what you are referring too. Part number KYO96645
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2862
|
||||
|
||||
I received the pulleys, and currently doing the fittings on the layshaft.
The B4 Slipper plates & spring havn't arrive yet, so the design is just up to the spacer.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2863
|
||||
|
||||
Ok now i see what you meant and superb. You will resolve having to worry about the nut coming loose if there is no thread. Great idea.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2864
|
||||
|
||||
Quote:
I am also thinking of bringing the spur a tad bit closer to the centre as well. Do you think that's a good idea? I should be able to bring it closer to the center by 4mm
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2865
|
||||
|
||||
May be a problem for me using my cf gearbox as ive screwed into the motor plate and sits just behind the plate. I suggest test the first and see how it goes then get a slight shorter one made and should be spot on.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2866
|
||||
|
||||
Guys,
Would the Lazer ZX-5 steering knuckles and hubs work for the Lazer ZX? I am debating if I should get the 3racing alloy ones
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2867
|
|||
|
|||
Very very nice, and you did the shading too ! but is there anyway to fit a fixed pulley for the front, instead of a non adjustable one way?
|
#2868
|
||||
|
||||
yes, there are room for 2 fixed pulley. but i am not sure how 4 wheel braking will affect the car. Currently, this set up is with the normal rear wheel braking.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2869
|
|||
|
|||
i prefer 4 wheel braking becuase yyou can brake very hard to avoid collisions with other cars.
|
#2870
|
||||
|
||||
As per my pm i meant 112 not 12.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2871
|
||||
|
||||
Kyosho America still have stock. $7 a pack.
I believe I can get them since I live in Vancouver which is very close to the border. So do we want 2 fixed pulleys now?? or one fixed pulley and one one-way pulley?? I did some measurements, and in order to fix 2 fixed pulleys, we need to shave 1mm off of one of the pulleys. Easily done with some sand paper at home.... or a dremel....
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2872
|
||||
|
||||
Actually, if you can measure the parts for me, I can get it made and anodize them blue
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2873
|
||||
|
||||
Ive got four new diff outdrives (basically 4 diffs) with used plates, plate adaptors and large silver washers. No diff gears or screw set or thrust. I cant use them due to no thrust race or screws so these are up for grabs, preferably a trade. Let me know.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2874
|
||||
|
||||
Id recomend buying one and making more as they didnt make many.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2875
|
||||
|
||||
Man I'd love to find a Lazer zx r. Had one when I was 10 and I have great memories with...
|
#2876
|
||||
|
||||
Welcome and yes this car is still highly addictive. Find a reasonable priced one and modify to nowadays and you will have fun showing them all how good it still iss.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2877
|
||||
|
||||
Thanks! Well I have been more a nitro guy for the past 15 years. But this car means a lot to me for personal reasons... On the Dec 10th 1993 I almost died from a 50ft drop. Came out of coma about 12 days later and that car was my christmas gift. Used it actively for 5 years, even though I had other cars (i.e. a 1990s Yankee which gave me the addiction to 1/8th nitro off road). Anyway, with moving several times I lost it. As soon as I can put my hands on one I'll buy it for sure! I don't think I would find a NIB one though...
|
#2878
|
||||
|
||||
Quote:
and i would like to have my layshaft with fixed pulleys... mvh Isobarik |
#2879
|
|||
|
|||
I always considered lazer zx-s evo were 200 have been produced, but may be wrong, there are only 100 zx-s released,so rare they are!
|
#2880
|
||||
|
||||
More like 300 zxs, 200 evo's. Not including prototypes.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
Thread Tools | |
Display Modes | |
|
|