|
#1781
|
||||
|
||||
If they support USB 'on the go' (OTG), then it should work.
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1782
|
|||
|
|||
Tekin RS Pro / Turnigy motor issues
Hi, I have a Tekin RS Pro and a Redline Gen 2 13.5T motor. This worked fine but the motor was worn out. This is where my problems started.
I bought a Turnigy Trackstar Outlaw 13.5T motor and the ESC would not pick up the sensor so was cogging badly. Tried new sensor wire - still nothing. Plugged the Tekin back in - works straight away. So wire and ESC must be OK - bad new motor? They replaced the motor with another Outlaw, but exactly the same happened. Tried an older Tekin motor - works fine. Tried the Redline again - works fine. Maybe another duff motor?? Replaced with a Turnigy Trackstar (different to the outlaw) - EXACTLY the same again! I've reloaded the Tekin ESC s/w - still the same. It's also definitely set to Sensored Only too. I simply swap motors back and it's perfect. All three Turnigy motors work in the forwards direction if operated so ABC are correct. Am I missing something, or are the new Turnigy's simply not compatible with the older RS Pro? Thanks in advance. |
#1783
|
||||
|
||||
New Hotwire version is out:
Version 258 New Features: - Ultra Fast Response - Improved Braking Response and control - Better throttle control and feel - Improved Circuit Durability - Increased Power Handling Capabilities - New Fan or Futaba OFF Error Code - HotWire 3.0 BLE Compatibility
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1784
|
||||
|
||||
Quote:
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... Last edited by bish; 22-03-2017 at 05:24 PM. |
#1785
|
||||
|
||||
Hotwire update.
Ok so I need to update my Hotwire v2. I'm doing it off my tablet. Question is which file do I need to down load off the website. Is it the zip or the exe
__________________
RB5 vega MCD RR5 ULTIMATE losi TEN scte losi eight 2.0e Traxxas xmaxx xray xb4 16 kyosho laser zx-r Losi xx team xtreme x11 predator X2 BURY METRO RCC |
#1786
|
||||
|
||||
Windows (PC) tablet or Android? If it's running windows (7/8/8.1/10) then just run the .exe If it's Android go to the app store and get the new version from there.
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1787
|
||||
|
||||
My old RSpro gone super hot
Hi guys
Mounted my good old RSpro with a Reedy m3 5.0t on my new B64 All the combo run super hot since the beginning Is the speedo too small for thar motor ? Gear ratio is 10.53. |
#1788
|
||||
|
||||
Buddy of mine had the RS (non pro) and it ran really hot with a Tekin 10.5 Gen 3. We reloaded the software, did a reset/r-calibrate and it was fine after that. Worth a shot?
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1789
|
||||
|
||||
HotWire V3.0 is out for Android V11.1800021.0
WHAT'S NEW -Version 10.19.0 (mine shows V11.1800021.0 for some reason!) -Add adjustment for V258 for Gen2 Brushless Controllers. -Add RX4 to controllers supported. -Add RX8 Gen3 to controllers supported. -Enhanced help feature initiated by long-touch on setting name. -Long-touch in Datalogs to enable/disable item in Data Log display. -Use volume buttons to increment sliders. -Use volume buttons to increment cursor in Datalogs. -Other minor bug fixes and performance improvements.
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1790
|
||||
|
||||
Quote:
I bought a new esc since that time; but will keep the RSpro as spare and reload the software as you said. |
#1791
|
||||
|
||||
Latest Android app has seemingly removed data viewing..not sure if by intent.
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1792
|
||||
|
||||
Data view now restored!
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1793
|
|||
|
|||
When will the new Hotwire 3.0 Bluetooth be release?
As I'm getting fed up with trying to find a cheap android tablet that will connect to the current Hotwire. |
#1794
|
||||
|
||||
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1795
|
|||
|
|||
Looking to run a tekin gen 2 esc in my b64 with a 8.5 will it cope with the heat running 4wd?
Cheers
__________________
Schumacher kc LD Tekno EB410 |
#1796
|
||||
|
||||
Tekin website states a 4lb vehicle limit https://www.teamtekin.com/rs.html (i'd assume you'll be under that anyway!) and a motor limit of 8.5 you should be good at that:
"Controls: Forward/Brake/Reverse Input Voltage: 2-3S LiPo / 4-9S NiMH-NiCD BEC: 6.0v / 7.4v @ 5.5amps Motor Limit Brushless Mode 2S: 8.5 Turn 2-pole 36mm Can Motor Limit Brushless Mode 3S: 10.5 Turn 2-pole 36mm Can Motor Limit Brushed 2S: 12 Turn 36mm Can Motor Limit Brushed 3S: 20 Turn 36mm Can Max Chassis Weight: 4lbs / 1815g Throttle Profiles: 7 choices (on board) Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay Brushless Modes: FWD Only / FWD-REV / FWD-REV Delay Dimensions: 1.0 x 1.3 x .51in / 26 x 34 x 12.9mm Weight: .85oz / 24g"
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... Last edited by bish; 29-07-2017 at 04:47 PM. |
#1797
|
||||
|
||||
Then again, they don't show 4WD buggy:
"OFF ROAD ON ROAD ROCK CRAWLING 1:10 2WD Buggy 1:12 2WD Pan Car 1:10 4WD Trail 1:10 2WD Truck 1:10 2WD Pan Car 1:10 4WD Comp 1:10 2WD Short Course 1:10 2WD Formula 1 1:10 4WD Touring Car"
__________________
Getting back to UK racing. Schumacher - Tekin - MRT - Futaba KC LayDown BossCat inbound... |
#1798
|
||||
|
||||
Quote:
Those ESC's are worth their weight in gold still since the drag race guys love them. The RSX is the new hotness and is equipped with a CNC'd heatsink housing and cooling fan as needed and is more suited to that application.
__________________
Tekin Team Manager |
#1799
|
||||
|
||||
Quote:
In any 4wd mod car I recommend the RSX to have plenty of head room on temp.
__________________
Tekin Team Manager |
#1800
|
|||
|
|||
I have a 6.5 gen 3 motor on which the magnet came away from the rotor and smashed into pieces, I’ve only ran it at around 8 or so meetings. It happened after a very small jump of approximately 1foot high and wasn’t a hard landing or anything so can’t imagine this was the cause but what else could have made this happen
|
Thread Tools | |
Display Modes | |
|
|