|
#21
|
||||
|
||||
Never bent mine, and I hit pretty much everything...
|
#22
|
|||
|
|||
apart from the apex
|
#23
|
||||
|
||||
servo holes in chassis
Kev, how you doing?...yes mate, I have measured the holes in relation to the kickup at the front (the edge that terminates at the end of the chassis just before the kickup) and they are about 1.5 mil out ...I first noticed when I swapped servo earlier this week. The chassis is defo not bent as it lays up perfectly straight on the work bench on its own with no rocking. Line of sight down the chassis and she's straight as a laser beam..plus, if it was bent the other chassis holes would have been affected, which they are not....strange as I guess nobody else has had this yet?. It doesn't seem to be causing the servo any problems so may be all good. Just thought I'd ask
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#24
|
||||
|
||||
Are the holes perfectly straight on the STD 201 chassis?
Just seems odd for it to be so far out without being deliberate. |
#25
|
||||
|
||||
Original 201 chassis
Quote:
From what I can see they are straight on the original chassis layout. Its all a bit odd but I guess it isnt affecting the buggy so I'll shut my hairy cake hole Brilliant car anyway
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#26
|
||||
|
||||
vega running weights?
Just out of interest what's every body weighing in at with their vega? Interested to know how everybody is finding their buggy at the scales in 'racing trim'? Interested in all models not just 201 that I have.
Post up your model and running weight (averages for most as tuning brass comes and goes for some drivers) Cheers
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#27
|
||||
|
||||
Vega weights?
Quote:
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#28
|
||||
|
||||
Quote:
If bumpy sections and rumble strips and horrible kick up type jumps then run all the weight Remember that with less weight run a slightly softer spring Hope this helps you
__________________
|
#29
|
||||
|
||||
Yup, its awesome...
|
#30
|
||||
|
||||
Quote:
Cheers Tony, top info as always mate Your feedback is always appreciated
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#31
|
||||
|
||||
weight
Cheers mate the buggy kicks arse from every angle, love it
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#32
|
||||
|
||||
vega wing thoughts?
A quick question for folks, has anybody found another manafacturers wing set that fits the Vega 201 rear end?... I prefer not to have to hack my way through really excessive trimming...thoughts please?
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#34
|
||||
|
||||
wings for vega 201?
Quote:
Hi Kev, I was talking about the Vega converted 201...I guess it was just an enquiry to see if anybody is using a different wing on this conversion really mate...any info that you may have seen is greatly appreciated
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#35
|
||||
|
||||
You can fit Kyosho RB5 wing mounts.
They fit perfectly without dremelling the shocktower and are MUCH better than the soft Tamiya ones. CHeers
__________________
Yokomo B-Max2 V2 MR Kyosho DB2 LRP Flow, Orion R10, Orion VST2, Speed Passion, Speed Power, B-Fast, Much More CTX, LRP X 20, |
#36
|
||||
|
||||
wing
Quote:
I may consider swapping to RB5 ones and hopefully open up the options with wing as well then...brilliant info
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#37
|
||||
|
||||
For your info the part number is LA213
__________________
|
#38
|
||||
|
||||
wing mounts
Cheers Tony, always appreciated mate
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
#39
|
||||
|
||||
Ran my RB5 SP2 VEGA yesterday. MY first ever 2wd racing and I qualified top of the C final very easy to drive. I love it and want more track time.
__________________
Trader Feedback Here. |
#40
|
||||
|
||||
And you didn't put the shocks I built for you - wait till you do that then you will be dancing from the ceilings - LOL
__________________
|
|
|