|
#1
|
|||
|
|||
Trashed servo problems
I’m now on my 3rd servo in my KC am I doing something wrong I’m not the best driver in the world but this is getting stupid now
I’m setting all end points up and am I best reverting back to a plastic horn or not? I’ve broke one savox black edition and one savox 1258 low profile Thanks
__________________
Schumacher kc LD Tekno EB410 |
#2
|
||||
|
||||
Quote:
Get a full sized Xpert RC or other brand with 15kg/cm+ torque and you should be fine.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
|||
|
|||
Ahh ok... first time I’ve used them tbh and I’ve never had this issue, I’ve a reedy in my 4wd and that’s never missed a beat “I’ll steer clear of savox 😂”
Thanks for your reply 👍🏼
__________________
Schumacher kc LD Tekno EB410 |
#4
|
||||
|
||||
The low profile savox servos are know to have weak gears in them, which isn't helped but the fact most 1/10 buggies don't have servo savers
I use standard size savox servos in my buggies and have never had any issues
__________________
Team Xtreme Predator X11, Associated b64d, Associated b6.2d, Arc A10, Awesomatix A12, Xray NT1.3 |
#5
|
||||
|
||||
No problems. The saxox low profiles gear set is particularly weak. Just check the torque ratings and pay a bit more than the savox price point and you should be fine.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#6
|
||||
|
||||
1257tg and 1258tg full size Savox are fine I've got them in all my cars and never had a problem with any of them, the small Savox are known to be weak.
__________________
----Cougar 2 team----Cougar 2 works----Cougar 2000---- ----Schumacher Bosscat---- ----Traxxas TRX1----Losi XXX CR----Losi XXX BK2---- ----AE B4 ft----Xfactory X6^----DEX210 V1---- ----TLR22 3.0----TLR22 4.0----TLR22t 4.0----TLR22 5.0AC---- ----AE B6.4----
|
#7
|
|||
|
|||
Same here plus my.lads both have the low profile ones in and fine so far and they hit pretty much everything on the track
|
#8
|
||||
|
||||
Use the plastic horn and buy some spares, alloy horns transmit all the shock into the servo. we use the 1258 savox without a problem. hope this helps you.
|
#9
|
|||
|
|||
sorry but to say savox servos are the issue is rubbish. if you are crashing that much that you are damaging servos then just use plastic horns instead they will strip before the servo gets damaged. i run savox servos and not had a single one fail yet in either 2wd or 4wd.
but you should ignore the low profile ones, theres plenty of room in kc for full size one |
|
|