|
#2801
|
||||
|
||||
Quote:
I know..... because I made them.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2802
|
||||
|
||||
It doesn't matter, there are plenty of room for the chunk of metal on the side because we are taking out the original chunk of aluminum with the one way. I will draw up something in the next day or two and show you.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2803
|
||||
|
||||
if you guys want bling on your pulleys, google "Square Aluminium Center Pulley 14T"
It will cost a bit more. And 3racing don't have a fixed 14T pulley
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2804
|
|||
|
|||
Nice! is that with the blue dyed rims one?
|
#2805
|
||||
|
||||
Come on let us know as it could be one of the ones I sold ages back. Be warned that you wont be able to run it unless you spend on a machinist to make a new rear shock tower mount and gear box bottom sections from alloy as well as they are stupidly brittle.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2806
|
|||
|
|||
The evo comes with his blue wheels and kyosho tyres. It is a fresh build and comes from Japan.
|
#2807
|
|||
|
|||
I saw that action, the rim must be dyed, original evo no come with rims and tires, but the car really nice condition,very hard to find
|
#2808
|
|||
|
|||
Quote:
Yes it's really hard to find in Japan too. |
#2809
|
||||
|
||||
Quote:
Now that we know 3 racing make them could we not spec one and ask them to make it for us?to the desired spec I'm sure there enough of us who want/potentially use them
__________________
_____________________________________________ Kyosho TF2 Kyosho TF3 Kyosho TF4-R Kyosho Lazer ZX-R Mk2 Kyosho ZXR Kyosho zx Kyosho Lazer 2000 (with zx parts) Atomic CR2 SCT _______________________________________________ Trader Feedback thread |
#2810
|
|||
|
|||
Quote:
Welshy, if we dont use the one way, we can use a standard pulley with the chunk on the side. |
#2811
|
||||
|
||||
Quote:
What I am trying to say is that, if our spec of pulley is a niche market, they won't make it.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2812
|
||||
|
||||
Quote:
But I can tell you that the blue belts are kelvar reinforced polyurethane belts. They are very similar to the Kyosho Spider's SP belts.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2813
|
||||
|
||||
OOsh
do you have the dimensions on the axle ???? mvh Isobarik |
#2814
|
||||
|
||||
Quote:
Got to love the red chassi ...why cant pargu make a beuty like that ....you should get some carbon holders for it ... mvh isobarik |
#2815
|
||||
|
||||
Yes spot on. I still think the yz10 wheels suited it better with the one piece chassis on the zxs. I preferred that due to less flex and better balance compared to the three piece. Still an evo, one of 200 ever made. Welcome to the club.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2816
|
||||
|
||||
I have some dimensions. But I want to make sure of all dimensions before I make prototypes.
I will get the pulleys, slipper plates etc first and fit it first. one other thing. Since no one make 4x14x4 bearings. An adaptor might need to be added to the layshaft to be able to fit a 6x14x4 bearing. If any of you are able to locate a 4x14x4 bearing, please post it here.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2817
|
||||
|
||||
Lazer zx pulleys.
Seen lots of posts about the pulleys and remembered i got this layshaft and solid pulleys with a lazer zx i got a few yrs back. Does anyone know which model it came with??
|
#2818
|
|||
|
|||
Quote:
i built my lazer diffs with WBD-5 last night and i find that the 8x14 bearings have to much gap between the aluminium spacer. this will not only cause the diff to move side to side a lot, but will also allow dirt to get into the rear gearbox. How do i get the correct shims to fix this problem? this is avery serious problem. if i cant fix this i can forget about my lazer or i have to back to WBD-1. |
#2819
|
||||
|
||||
Quote:
To solve the shimming issue, you will need to get some 8 x 14 shims. Luckily I got some at my desposal I was able to shim it properly. I rebuilded the rear gear box a few time to get it to be shimmed correctly. It's all trial and error for me.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
#2820
|
||||
|
||||
I just ordered the square aluminum pulleys and diff pulleys (see if I can make the ball diffs more durable).
They should come in the next week or so. After that, the fitting will begin. Wish me luck.
__________________
Kyosho Lazer ZX-RS Kyosho RB5 SP2 WC - Vega Kyosho Mad Force Kruiser VE Kyosho TF6 SP Kyosho Plazma Ra |
|
|