|
#21
|
||||
|
||||
Quote:
|
#22
|
|||
|
|||
Dang I thought I had it. Ok I’ll keep looking then, thanks.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#23
|
||||
|
||||
Surpass is bringing out a 380 (28mm can) sensored range shortly, maybe look into that.
|
#24
|
|||
|
|||
Quote:
I saw that, I am curious about it. What is a good ESC for it with a small footprint?
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#25
|
||||
|
||||
Quote:
Anyone got a link to details of the 380 sensored motor from Surpass?
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#26
|
|||
|
|||
Quote:
Looks pretty sweet
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#27
|
|||
|
|||
I went ahead and purchased the SkyRC TS50. It appears that the SkyRC sec has a smaller footprint which is nice, and 50amps. I will use the hobbywing in another project. I have still yet to order a different motor for the car. I am very interested in the Surpass motor.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#28
|
||||
|
||||
Ohh that is a smart motor! I think I'll have to try and get one for my Chunk
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West Last edited by Danosborne6661; 21-10-2021 at 09:50 AM. |
#29
|
|||
|
|||
Ok, finally put her together, needs to come apart a little bit to adjust a few things, and shim the diff a little to get it just right. I really wish I had another one outhouse rear blocks. Just waiting on my servo, and the LC racing motor to come in the mail and then I can wire it all up. I might shim the wing to have less angle.
Untitled Untitled Untitled Untitled Untitled What is the method everyone uses to secure the body? It doesn't look like there are really any good spots for that. I will come up with something.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#30
|
||||
|
||||
What are the tyres and the turnbuckles? I like those.
When cutting down the B4 bulkhead, a few people started to leave excess material there for velcro, as well as on the side of the posts. Many also put velcro on the side of the lipo as well as on the top of the gearbox - that just about held it in place
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West Last edited by Danosborne6661; 30-10-2021 at 03:16 PM. |
#31
|
|||
|
|||
Quote:
I wish I can find the GHEA racing bulkhead. How much different is the DR10 bulkheads and steering? it looks similar, but maybe metric now?
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#32
|
||||
|
||||
Dr10’s are basically b6’s so metric yes. There’s a ghea brass bulkhead with hinge pin brace on eBay right now. B4 parts aren’t too hard to find, well most of them aren’t
FF racing also have a lot of b4 parts
__________________
CML Distribution - Distributors of Quality Radio Control Models & RC Hobby Products Last edited by Big G; 03-11-2021 at 03:37 PM. |
#33
|
|||
|
|||
I finally got around to finishing up the Chunk.
I added some spacers for front and rear of the diff to make it perfectly level with the bottom of the chassis. Next I placed everything where I thought it would work best based on pics of others setups, then cut and soldiered the wires. Then I powered it on and linked my receiver, and calibrated the ESC and set some basic parameters with the program card. Then I took it out for a test run. Drives nice. I found I had the hex adapters in the rear too tight pushing on the bearings causing a lot of drag, I must have over tightened the wheels. I also needed to make an adjustment to the Avid Triad slipper to keep one of the discs from rubbing the motor mount. I also made some more adjustments for setup and it runs super smooth now. What setups are recommended? I am currently this: 35WT oil f/r 18/72 gearing Front 0 toe and -1.5 camber Rear standard toe and -1 camber. Thanks.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#34
|
||||
|
||||
Looks great! Enjoy driving it!
How are you going to paint your bodyshell? I'll get some photos of mine up soon too.
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#35
|
|||
|
|||
I’m not too sure on the paint, I might try my best to replicate a variation of one of the Phat painted ones maybe.
What is your recommendation for suspension set up? So off throttle on deceleration or braking the rear of the car wants to slide around. This is when going straight or when turning. There is no binding, so I have laid the rear shocks down to inner hole on the tower, and I flipped the rear most hinge pin holder around to hopefully see if that helps, I haven’t been out to drive it yet, since but I am hoping it helped. I also plan to run lighter oil in the rear shocks and drill out the piston holes slightly. I was reading several posts on the EMB-1 that they do it to the shocks, and since I am using EMB-1 shocks I might give it a go.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#36
|
|||
|
|||
Quote:
Looking forward to some photos. It was a lot of fun building it. I really like these one off style kits, do you think Phat will have another cool setup again like this? Maybe a modern chunk, or a chunk 4wd? That would be sweet.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#37
|
||||
|
||||
Here's a photo from the first lockdown over here.
That's the original Chunk in the middle inbetween my B4 and a Losi Micro-t! At the time I just had the new bodyshell painted, but I still have the original that you see from the publications. For good measure here's Craig Harris from when he borrowed my car when I wasn't able to make an event
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West Last edited by Danosborne6661; 16-02-2022 at 06:29 PM. |
#38
|
|||
|
|||
WOW!!! That is super awesome I love it!!! I might sort of copy your paint layout.
Do you have any under body pics? What shocks are you running, and what wing mount are you using to have your wing like that? Thanks for posting!!! I am trying to source some GHEA front parts
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
#39
|
||||
|
||||
Here's a few more I found while sniffing around! These aren't how the car currently is... but it's how it was in its first form and how it was raced in 2010-2011.
The shocks in the photos above that you asked about are from a Carisma GT14/GTB btw. I think someone in this thread commented what the wing mounts were? Possibly Losi XXX-4 maybe? I'll get some more recent photos when I've put the last few bits of the car back together with a sensored set-up
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#40
|
|||
|
|||
Cant wait to see some photos after the upgrade.
I got some goodies in the mail. Also got a JConcepts front brace not pictured. I am on the lookout for a GHEA brass front brace/bulkhead setup.
__________________
Team Associated RC18B Original Kyosho Ultima (rebuilding) Traxxas Mini Revo RC boats that put my cars to shame in speed! |
|
|