|
#401
|
||||
|
||||
LOL that'l teach you Cris to mess with us Tamiya die-hards....
|
#402
|
|||
|
|||
Matt, I think if flipside is wearing out his B4FT after one meeting, that maybe there is a deeper underlying issue that needs resolving
Is the Tamiya die-hard club like the masons? Full of doctors and other rich folk? LOL
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#403
|
|||
|
|||
If each car was hand delivered by Pidge, who then came into your house and helped build it I could understand.
the first wouldnt be viable, but i recon if you paid then he would build it for you
__________________
~ICON-RC~ATOMIC CARBON~LMR~TONISPORT~NUCLEAR RC~
|
#404
|
|||
|
|||
Quote:
But I'm not even a tamiya die hard, was just guessing I would spend the money on an AC CR2 instead! |
#405
|
|||
|
|||
AC all the way
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#406
|
||||
|
||||
Then what are you two doing on here if your not Tamiya lovers ?? Bugger off to your own Section then
You know, that dark place somewhere above where not many people go... |
#407
|
|||
|
|||
There was a thread somewhere that involved buggering an osterich....I'll go back there then lol
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#408
|
||||
|
||||
Quote:
You mean things like 54241 TRF201 3x35mm Ti Coated Suspension Shaft (2pcs.) 54242 TRF201 Aluminum Rear Suspension Mount (3.0, Front) 54246 TRF201 Aluminum Rear Upright (1.0°) 54243 TRF201 Aluminum Rear Suspension Mount (3.0, Rear) 54245 TRF201 Aluminum Rear Upright (0.5°) Btw, Stellamodels will have 201 in stock next week. Price ~$210. Great supplier. |
#409
|
||||
|
||||
You got the same email I did Good news on the suspension holders, on rctech sounds like the plastic ones may not be the best..
I usually find Stella great, just been struggling a bit on the preorder side this time! Quote:
__________________
Dave "Amish FJ" Gibson RB Products ~ Yokomo Nuclear RC ~ Xpert ~ Hacker |
#410
|
||||
|
||||
Those rear uprights may well prove useful on the 511, I know they used 0.5 ones on the 501 at some point which weren't released. One of mine is poor on low grip traction at the rear so a bit more toe in works for me
__________________
Dave "Amish FJ" Gibson RB Products ~ Yokomo Nuclear RC ~ Xpert ~ Hacker |
#411
|
|||
|
|||
|
#412
|
||||
|
||||
building the car was flawless!!
the tranny is very smooth ! the steering rack uses 6 bearing kool! and yes the grey ball cups ! the shk h/l body golden shk shaft silky smooth ! hex screws all over except for 4 philips to hold the hinge pin on the arm the only tools u will need is a 2mm hex a 1.5mm hex the famous tamiya cross and a phillips screwdriver ill post pic later pete68 |
#413
|
||||
|
||||
[QUOTE=DaveG28;384978]You got the same email I did QUOTE]
Sorry if I spoiled your surprise Dave. Won´t happen again. Really looking forward to building it. Have´nt built a new car since april last year (my 511). * 54246 TRF201 Aluminium Rear Upright (1.0°) * Availability: July These blue uprights will enable 1.0 degree of rear toe-in angle to enhance grip. The outermost bearing position features larger 1350 bearings (standard size is 1050 bearings), which contributes to an improved maintenance cycle. Compatible with TRF201, DB01, and TRF511 chassis machines. Set includes: * 1350 bearing x2 5x8mm hex head ball connector (black) x2 * 5.5x3mm aluminium spacer (blue) x2 5.5x0.5mm aluminium spacer (blue) x2 Images show CAD drawings * 54245 TRF201 Aluminium Rear Upright (0.5°) * Availability: July These blue uprights will enable 0.5 degrees of rear toe-in angle to enhance grip. The outermost bearing position features larger 1350 bearings (standard size is 1050 bearings), which contributes to an improved maintenance cycle. Compatible with TRF201, DB01, and TRF511 chassis machines. Set includes: * 1350 bearing x2 5x8mm hex head ball connector (black) x2 * 5.5x3mm aluminium spacer (blue) x2 5.5x0.5mm aluminium spacer (blue) x2 * 54243 TRF201 Aluminium Rear Suspension Mount (3.0, Rear) * Availability: July This blue aluminium suspension mount helps ensure secure attachment of the suspension arms and it is also smaller in size than the kit-standard part. Furthermore, by installing it upside down you can change the position of the suspension by 1mm, thereby giving you another way to fine-tune your car’s settings. Aluminium Rear Uprights For Tamiya TRF201 Images show CAD drawings * 54242 TRF201 Aluminium Rear Suspension Mount (3.0, Front) * Availability: July This aluminium suspension mount helps ensure secure attachment of the suspension arms and its blue colour will also dress up your machine. |
#414
|
||||
|
||||
where can we find the weight of the new trf201 frt spring !!
#54221 blue/green/red |
#415
|
||||
|
||||
Oooh look, those rear hubs have copied the Kyosho RB5 alloy rear hubs with the phat bearing on the outside...
Has anyone designed a mid conversion for it yet? |
#416
|
||||
|
||||
HOW DID YOU GET IN TOUCH WITH THEM?I HAVE EMAILED THEM TWICE WITH NO RESPONSE,DID YOU USE THE ORDER FORM?CHEERS
|
#417
|
||||
|
||||
hmmm thought the b44 had these first
|
#418
|
||||
|
||||
Quote:
When I've ordered before I just sent them an email; just click on E-mail under the 'How to Order' section on this link --> http://www.rc-champ.co.jp/Champ_Inte...onal_index.htm |
#419
|
||||
|
||||
Has someone confirmed the 201 defintely comes with good quality ballstuds and not the made of cheese 511 ones?
Love those rear hubs, the K ones look funky, looks like more expense sigh!! Good tuning tip though, my 511 was awesome indoors on sloppy stuff except needing more traction out of corners, hoping these will help!?
__________________
Dave "Amish FJ" Gibson RB Products ~ Yokomo Nuclear RC ~ Xpert ~ Hacker |
#420
|
||||
|
||||
I know where there is 2 in stock and I've used the company before for my trf501x, might get caught for import tax though I did with the 501x, 1st 2 people to pm me can have the link
|
|
|