|
#41
|
||||
|
||||
Any of the team using Ghea pistons?
|
#42
|
|||
|
|||
Not sure there's any even in the country yet!!
I'm sure they will be tested at some point, but at the minute the team are all achieving good results using the standard pistons
__________________
Yokomo - LMR |
#43
|
||||
|
||||
im currently using trish bits 5 hole rounded pistons to good affect
__________________
Retired Racer |
#44
|
||||
|
||||
What's different with the trishbits pistons and is he going to be doing them for Jo public
|
#45
|
||||
|
||||
Hinckley
Did Simon or anyone else run there cougars at Hinkley the other week? If so how did you find it and what setup did you end up with?
__________________
http://www.rprcdistribution.com |
#46
|
|||
|
|||
Springs
what springs come with the kit?
also, I noticed there are med and long springs. I initially thought the long ones were for the rear, however looking at the manual it can be used for both front and rears. whats the consensus for the spring lengths? Are longer springs for bumpy surfaces, med for big jumps. Am I correct in saying longer springs are softer and shorter springs are harder? |
#47
|
||||
|
||||
Quote:
__________________
Retired from racing
| パベルともうします、よろしくおねがいしますスロバキア人だ、今イギリスにすんでいます。| | Ralls Racing | RCSGraphicWorx - paints, paintjobs, decals, custom wear | Schumacher Racing | Mr.O inserts | |
#48
|
|||
|
|||
Quote:
now to find a place in the UK that will ship for a decent price to Australia. I had 2 springs and 2 undertrays in my checkout at schumacher-racing, and they quoted 33pounds for shipping alone unfortunately they didnt have the parts I wanted when I placed the order the the SV. Does anyone know of some places that will ship parts overseas, for a decent price? |
#49
|
||||
|
||||
Quote:
__________________
Retired from racing
| パベルともうします、よろしくおねがいしますスロバキア人だ、今イギリスにすんでいます。| | Ralls Racing | RCSGraphicWorx - paints, paintjobs, decals, custom wear | Schumacher Racing | Mr.O inserts | |
#50
|
|||
|
|||
Link Mounts
Hi,
Just wondering what the kit link mounts were? Thanks Wayne |
#51
|
||||
|
||||
I used the Trishbits pistons and brass weights at the weekend. And what an awesome additon to the car. I would highly recomend anyone buying them. Nice guy too, always willing to help with questions etc
__________________
Schumacher CAT K1 Schumacher Cougar SVII Schumacher Racing - Team Tekin - Spektrum - Inside Line Racing - TrishBits |
#52
|
||||
|
||||
Pics and any more details
|
#53
|
||||
|
||||
Any RHR setups?
|
#54
|
||||
|
||||
+1 here please, need to make sure I have all the right gear for the oople race.
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
#55
|
|||
|
|||
One thing is for sure, your man 'GOD' was running some freaky naughty short front camber link plates with an armful of washers at RHR. (Mossy had his multi-hole option ones on)
Some team drivers also ran the plastic spacer above the rear camber link plate to help lower the ballstud. |
#56
|
|||
|
|||
I'll get my setup posted as soon as my laptop stops playing up, hopefully tonight
__________________
Yokomo - LMR |
#57
|
|||
|
|||
I tried uploading but it's too big for the forum, should be on the Schumacher site tomorrow though
The front link was something we have been testing to help lose some of the steering the car seems to have. I found it worked well at RHR, Si thought the 45mm link was better though. When we were testing today we both settled on the 45mm front link. The plastic spacer at the rear doesn't necessarily have to go under the link plate, it can be used as a tuning option. I personally always run with the plate as low as possible, and normally 1mm of spacing on the ballstud too. Any more questions feel free to ask
__________________
Yokomo - LMR |
#58
|
||||
|
||||
Do all the washers up front give an in between feel, or is there any other reason for shortening the link and then in effect lengthening it again with the washers?
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
#59
|
|||
|
|||
Quote:
|
#60
|
|||
|
|||
Quote:
__________________
BMCC east midlands No1
|
|
|