RW Racing Cougar SV gear set

[MK Racing]

Just to let you all know that we have received our 1st batch of the RW Racing transmission gear sets for the Cougar SV.

http://www.m-k-racing.com/product_in...oducts_id=8069

[mikeyscott]

Got mine to try this weekend already after Steve ran his proto ones at F345s.

Steve has test these for a few meetings with success

[danharding]

Used mine today, lovely bit of kit.

[GRIFF55]

saw these today and they looked pretty nicely made bit of kit

[MattW]

Neil's stuff always is!

[hazeandfizz]

Very nice bit of kit and good value.

James.

[Raul Garcia]

Originally Posted by MarcKnight

Just to let you all know that we have received our 1st batch of the RW Racing transmission gear sets for the Cougar SV.

http://www.m-k-racing.com/product_in...oducts_id=8069

Still available, and ship to US?

[moth898]

you have to contact mk through their website via e-mail because his automated checkout doesn't include US or Canada. He will ship it no matter how you pay, no worries there.

tight tolerences, a little too tight when fitting the bearings but I guess thats more of a plus than minus. The gears installed in the aluminium gear housing using acer bearing are mint, the car whistles around the track. Worth the money in my opinion, cost me 45 canadian shipped I think.

[mikeyscott]

I have used mine and they are superb, got an alloy gearbox coming and after the answer RC gearbox bearing kit once Marc has them back in stock

[Raul Garcia]

Well I have the alloy housing already, and also have alloy outer gears too. So the only parts I want are the layshaft and idler for inside the case.

[mikeyscott]

Yup Neil does a cracking job with the gears etc

[reg]

very nice peace of kit,just fitted mine,i just wondered why they have gone to all the trouble of making the idler gear when the kit one is metal,would it not have been better leaving out that one and making the one that fits on the layshaft out of metal,that way all the gears would be metal.........still as i say its a nice peace of kit

[The Doctor]

Yep, just installed mine too Mark. Looking forward to whooping your backside with it next week.

[reg]

Originally Posted by The Doctor

Yep, just installed mine too Mark. Looking forward to whooping your backside with it next week.

your look forward to whooping my backside with a layshaft

[MK Racing]

Originally Posted by reg

very nice peace of kit,just fitted mine,i just wondered why they have gone to all the trouble of making the idler gear when the kit one is metal,would it not have been better leaving out that one and making the one that fits on the layshaft out of metal,that way all the gears would be metal.........still as i say its a nice peace of kit

We tested with an alloy idler but the delrin lasted longer. If you look at the kit idler, it is cast not machined so not very good quality, plus with all metal, the gearbox was noisey.

Marc

[reg]

Originally Posted by MarcKnight

We tested with an alloy idler but the delrin lasted longer. If you look at the kit idler, it is cast not machined so not very good quality, plus will all metal, the gearbox was noisey.

Marc

thanks for the info Marc.