|
#1
|
|||
|
|||
ez run
hi ,any thoughts on gearing , using a 5.5 ez run , what pinion and spur should i use for general use , still using nimmh cells??????????
|
#2
|
|||
|
|||
hello is anybody outhere??????????
|
#3
|
|||
|
|||
You didnt say what car.
Im running a 19 tooth pinion with my LRP 5.5 in my B4 with the standard spur. Although to be honest a 5.5 is a bit much for a 2WD car and I think a 7.5 would be more suitable.
__________________
www.MattAirbrushing.co.uk - Custom RC paint. |
#4
|
|||
|
|||
I use in some of my 4*4 cars an EZ Run 60 with a 5,5t with a gearing of 9,0 and I have altered the timing to 18,75 instead of the standard 15.
I am using this with 3200 trackpower. It is a cheap combo but you can compare the speed to Novak GTB with a 6,5 R and until now (touch wood) I did not have any problem yet (I have 3 of them). Make sure that the speedo gets enough cooling. Greetz |
#5
|
|||
|
|||
thanks guys it is a b4 , do i need to change body to give more clearance for cooling ?and do i need to change spur , running a 81 at moment???
|
#6
|
|||
|
|||
For a 4*2, I would even go to a ratio of 8.5.
You will need to take of the fan of the speedo because the body is not high enough. Two options, put the fan in front of the speedo so that cool air goes over the speedo or just take the fan off completely; but if the speedo is thermaling (too hot!) you will have to put it on again. But in my opinion, a 5.5 for a B4 is too much, I would rather go for a 8.5. If you have some more questions, let me know. |
#7
|
|||
|
|||
thanks for all of you that gave me info, just put the car together with the 5.5 ez run and tried it ...it is very very fast ,runs cool as a cucumber this is a great speedo combo for your money have yet to try with spikes on grass , but expecting a few wheelies thank you ebay £46.00 well spent???
|
#8
|
|||
|
|||
Quote:
With my LRP 5.5 (which may be slightly more powerful than the ezrun) I found that turning the throttle end point down to 90% helps to tame down the power on lower grip tracks.
__________________
www.MattAirbrushing.co.uk - Custom RC paint. |
#9
|
|||
|
|||
thanks ,waiting for card reader to arrive from hong kong will adjust then cheers....
|
#10
|
||||
|
||||
Quote:
__________________
|
|
|