|
#1
|
||||
|
||||
New Schumacher on the block
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#2
|
||||
|
||||
Very Nice!
been waiting for this... that's winter club racing sorted 2S saddle car... going to be some quick racing. R.I.P Mardave |
#3
|
|||
|
|||
Its going to be interesting to see how it compares to running against the ne Mardave VRX CE.
2s .... Is there even a 2s 1/12 class |
#4
|
||||
|
||||
Don't think so... not an on road fan tbh but did get a mardave a while back as i live near Ardent, the guys that run it are ace and it was to keep my thumbs loosened and hopefully tidy my buggy lines up a bit..
had it for 3 weeks cos the politics were horrendous... but tried my 7.4V lipo saddles when i got bored with trundling around the track... even with the G2 motor it was 1/12 speed if not faster and if it had been allowed i would have probably stuck with it |
#5
|
||||
|
||||
To be discussed at 12th EGM the end of this month
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#6
|
||||
|
||||
That's a fantastic looking bit of kit for under £100. Looks tight for the electrics though?
Can't wait to buy one |
#7
|
|||
|
|||
It looks amazing value lots of ideas here back to the Schumacher routes of pan cars in the way the rear end and motor is mounted. Great to see them trying to revitisle this area of the sport.
Last edited by Yachty; 11-04-2012 at 05:02 PM. Reason: typo |
#8
|
||||
|
||||
I had my grubby little hands on this last week and it's very nice and there will be a diff option coming out for it also but not yet !
The roll stiffness can be adjusted by moving the rear springs inward or outward via the 6 points on the rear. The springs are in the inner most points in the picture.
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#9
|
||||
|
||||
if your going to buy one of these you may as well just race pan cars
leave mardave standard thats what makes it great
__________________
BRONSON PRODUCTION tHE ONE MAN RACING TEAM |
#10
|
||||
|
||||
It is a pan car!
it's also a 1/12th saloon. It's not a Mardave! Value for money wise this wins hands down... hope its a single make Superstox class, preferably not linked to the existing series/championships hope there will just be a motor wind limit or cheap control motor at worst and allow any modifications/tyres/bodies/aftermarket bits etc etc for the class, maybe 1s and 2s classes if needed and none of the other B.S politics and stupid monopoly on sales for anything connected type rules as with existing racing of similar types. tbh i only want one for indoor winter club racing and playing down at Ardent during their open practice days... would have kept the Mardave if id realised i could run it at Broxtowe indoors during winter. |
#11
|
||||
|
||||
looks more like a mardave rip off to me
I think a proper pan car would kane this sorry but i will stick to my stock dave thanks
__________________
BRONSON PRODUCTION tHE ONE MAN RACING TEAM |
#12
|
||||
|
||||
have fun with it matey,
as long as you enjoy it then great |
#13
|
||||
|
||||
Quote:
Alloy, carbon, titanium, all sorts of adjustments, and thats on the new Mardave V12VRXcec. And thats a tenner more than the SupaStox.
__________________
Yellow wheels are faster - FACT |
#14
|
||||
|
||||
I really Like the look of this !
A proper designed car Sold all my mardave's as they were crap Between the plastics braking and the metal bending the car was never the same for two races, and don't get me started on the politics of the class ! ( Role on the abuse, lol !!!!! )
__________________
Schumacher Speed Passion Futaba Support from: My Back Pocket Driver - 'Derek' Feedback Link : http://www.oople.com/forums/showthread.php?t=48311 |
#15
|
||||
|
||||
The supastox looks much better value.
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#16
|
||||
|
||||
Quote:
It's aimed at the Mardave circuit racing class, which is currently run with much more expensive Mardave V12VRXcec cars with carbon chassis and alloy rear pods and lexan Lotus GT or Mazda 6 bodies. I wouldn't class those as traditional Mardaves either. There are fundamental differences that mean this isn't and will never be a pan car. The BRCA is currently trying to sort out rules for a new GT12 class as a support class for 1/12th to replace the Mardaves only class they ran last year. The draft rules are for 1S lipo with a 13.5 motor. There is nothing in the proposed rules stopping anyone fitting the Schumacher 4 link rear suspension on a Mardave V12 either. Discussion is going on over on Racechat http://rcracechat.com/vb/showthread....omments-please
__________________
Visit my showroom |
#17
|
||||
|
||||
2s chassis to beat the M06
1s chassis to keep the stock car clan happy
__________________
Website: http://www.wbmcc.co.uk/bingham-model-raceway.html Schumacher Cat Xls, Rc10 Team(retired), Mardave Cobra, SST 98 Rally Car, TT02 Rally car, Wpl-c24 and Element Enduro builders kit #71 #deaddogracing Autocare, unit 5 candleby Court, Cotgrave NG123RT. |
#18
|
||||
|
||||
Quote:
and four cell nimh and g2s for proper racing
__________________
BRONSON PRODUCTION tHE ONE MAN RACING TEAM |
#19
|
||||
|
||||
edited that for you...
__________________
|
#20
|
||||
|
||||
Well the Schumacher does have chassis slots for 4 cell.
__________________
Visit my showroom |
|
|