|
#1
|
||||
|
||||
14mm wheel hex on 410R
Rather than having a mixture of rango/losi pin type rear wheels for the 410R and 14mm hex rear wheels for the 210, can the 410R be converted to 14mm wheel hex at the rear? Or would it be more simple to run the 210 as a pin rear wheel fitment and stick with the old type Rango/Losi rear wheels?
Apologies i this has been answered elsewhere but can't find it. Cheers
__________________
|
#2
|
|||
|
|||
Hi
Both versions are possible. I will change my 210 to the pin version so that I can drive my old B4.1 rims. You need: TD714002 Wheel Cone Rear TD712003 Wheel Distance Andre |
#3
|
||||
|
||||
Same as what I did at the weekend as I have a number of BB green compound tyres on Losi wheels.
|
#4
|
||||
|
||||
Thanks fellas, seems the most sensible option as I have a zillion Losi wheels and will only have the 2 14mm wheels that come in the kit. The overall width and offset is the same is it?
Cheers
__________________
|
#5
|
||||
|
||||
My plan is to try and use the hex on my DEX210 on high bite tracks pending tyre options etc. For other surfaces I'll just reuse old wheels rather than purchase new ones.
|
#6
|
||||
|
||||
I converted all of my wheels to 14mm hex now and put the 410 onto the hexes too. You get an extra 2 hexes in the 210 kit so you just need another TD330312 so you have the extras. Then 2x TD310135 (the 14mm pins)
I have now rid myself of the spoked wheels and all of them are white solid wheels |
|
|