|
#1
|
||||
|
||||
NiMH in CAT SX LiPo
In France, we are still waiting to perform LiPo batteries during official races so I decided to temporary place 5 NiMH cells in my CAT SX LiPo:
The servo and motor are a little shifted on right side as batteries shifted on center so that the right/left balance is correct (assuming 10g difference between right/left is acceptable): The main issu was to keep the cells in place so I made a battery tray mounted with 2 screws on the LiPo chassis: The servo's horn has been bent too:
__________________
http://www.mid44.com/ |
#2
|
||||
|
||||
I think it will be better to use those low-profile servos (eg. KO Propo 2413 or Futaba 9551) to avoid bending the servo horn.........
__________________
mini@Vintage Team Yokomo/ Associated |
#3
|
||||
|
||||
Probably but it's only for one race...
Fantastic job, Oliv
__________________
Schumacher KF | K1 Aero | RWS RZ6R |MiniZ MR-03 | Orion R10 esc | LRP motors | Orion 90c lipos Rusti Design - Awesome custom stickers and cool stuff My trader feedback |
#4
|
||||
|
||||
Exactly, one or two races only
Thanks mate (I hope this way I will convert you to the dark side of the force)
__________________
http://www.mid44.com/ |
#5
|
|||
|
|||
Great looking installation fella!
|
#6
|
||||
|
||||
Perfection as usual, your cars always look mint
|
|
|