|
#1
|
||||
|
||||
SERVO ARMs TM2 V1
Hi All im running the absima Combat Series servo in my tm2 v1
now iv stripped the threads on my standard servo arm witch comes in the box Now iv been looking at the upgraded model but not 100% sure witch is the correct one I need could someone send me a link please or pass on a bit of info Thanks Steve
__________________
Xray xb2 CA Xray xb2 Dirt Xray XB4 Absima - Electrics |
#2
|
|||
|
|||
http://insidelineracing.co.uk/inside...arm-teamc-25-p
I've not stripped a tm2 plastic one yet, here's the metal replacement link |
#3
|
||||
|
||||
hi thanks for that, this is the only one I have done
I bought a samwa x transmitter and soon as I started to use this I striped all the threads after looking into the setting I had way to much on the steering so think this was the problem I am new to all this so the odd crash / bump into the barriers doesn't help
__________________
Xray xb2 CA Xray xb2 Dirt Xray XB4 Absima - Electrics |
#4
|
||||
|
||||
Check your end points
|
#5
|
||||
|
||||
hi my mate check the end points and was, set up to fair think was about 110
all sorted now well will be when my new servo arm comes
__________________
Xray xb2 CA Xray xb2 Dirt Xray XB4 Absima - Electrics |
|
|