|
#1
|
||||
|
||||
Lunsford Shock Mounts
Looking at getting some of these for my x6 with losi shocks, do i need the associated ones or losi ones or are they the same?
__________________
|
#2
|
||||
|
||||
Losi ones for Losi shocks as it's the shock eyelet size that's important.
I use them on my X6 and whilst I don't change top shock position much it's well handy for taking the Azarashi front wing on and off that is held on by the top shock screws.
__________________
Nortech is ACE! |
#3
|
||||
|
||||
I had the AE ones on my X6 with Losi shocks and they were fine!
|
#4
|
||||
|
||||
cheers guys
__________________
|
#5
|
||||
|
||||
Ah, fair do's, I never realised they were the same size
__________________
Nortech is ACE! |
#6
|
||||
|
||||
I've just bought 4 titanium screws from lunsford, alot cheaper :-)
and cheaper to replace if you break them.
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#7
|
|||
|
|||
Dan, the szie of the eyelet inner on them both will be the same since as standard a 4-40 screws passes through them both, it is the length that is slighlty different and also the thickness they are to allow them to pass through the shock towers which varies between AE and Losi ones
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#8
|
|||
|
|||
I have the Losi quick change mounts and they are JUST long enough to pass through the AE shock tower and get a nut on them. The Losi tower must be a bit thinner.
|
|
|