|
#141
|
||||
|
||||
Here's my personal 10.5 2wd buggy setup:
__________________
Tekin Team Manager |
#142
|
||||
|
||||
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#143
|
||||
|
||||
Tekin, I have a problem
esc ran fine for qualifying but not the final. Leading the C final and it kept cutting out. Not just the esc but a total shut down Looked over all connections etc and nothing is showing up.
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#144
|
||||
|
||||
first of all, check the capacitor connections. Did it shut down, and come back to life again?
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#145
|
||||
|
||||
Quote:
had it out in the garden and it hasn't cut out onboard temp was no higher than 4 led's
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#146
|
||||
|
||||
the only time I have had that, is a cap that went bad, changed the cap, never had an issue since.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#147
|
||||
|
||||
got some new ones on the way,
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#148
|
||||
|
||||
got some new ones on the way, in the meantime I'll swap them over in between speedo's
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#149
|
||||
|
||||
Quote:
it'll in running on a B4 gearbox, if you quote for other other gearbox quote the internal so I can convert it please
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#150
|
||||
|
||||
not run one in a 2WD as yet, but I just set Millzy's B4 up with a 7.5 on low boost and stock motor timing, with a 25tooth, so if you run with 20-30' boost, I would say, a 25 is a good place to start.
Post how you find it, and gearing, I know on a 19t I was up to a 28, but the 10.5 just revs a lot more.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#151
|
||||
|
||||
Quote:
db off rs 75 bs 100 nw 10 mt 3 tp 3 vco 2 pc off tb 5 cl 80
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#152
|
||||
|
||||
don't forget, the 10.5 will have a little less torque, so you must use the boost to get the rev's. But your settings are pretty good, just ramp up the boost to 20 to try with first.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#153
|
||||
|
||||
Quote:
__________________
Team Associated- HobbyWing- Reedy- CML |
#154
|
||||
|
||||
done it, going in garden to give it a whirl on a 24/78
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#155
|
||||
|
||||
if you are lacking a little in top end, turn the boost up, don't touch the motor timing. Also, just keep an eye on esc temps and motor temps. If it gets too hot with the boost turned up more, gear up one.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#156
|
||||
|
||||
If the esc is "cutting" out chances are that it's not us(Tekin) but your spektrum or other 2.4ghz receiver dropping out. Run a small cap on the receiver. Spektrum makes one for just this purpose. The receiver is amping out and shutting down and coming back to life.
We will only do what we're told. When the receiver does this it gives us no signal and by the time you get to the car to check it's back on and shows nothing wrong. For 10.5 offroad try 81/22-24 with a B4 with 20 degrees of motor timing and 10-15 on the boost.
__________________
Tekin Team Manager |
#157
|
||||
|
||||
Quote:
if it plays up tonight I'll pop it in motors set to 20 boost no motor timing I'm geared 8.1 against your suggestion @ 9.1
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#158
|
||||
|
||||
I am erring on the sid of caution for the first run, as I have not run 10.5 in a 2wd as yet... for comparison, if you can do roll out, I run 6,09:1 on 58mm diameter wheels in saloon.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#159
|
||||
|
||||
As requested my 4wd mod setup. I use this with a 6.5 or 5.5.
If the bottom end is too much add a bit of punch control so you don't lose your mid and top end!
__________________
Tekin Team Manager |
#160
|
||||
|
||||
Quote:
esc ran OK last night after final noticed all led's lighting up light on specky was still on and strong think I'll re bind it Quote:
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
|
|