|
#1
|
||||
|
||||
Which has the better front end, DIMEC metal +8?
Hi, Change from losi 22 to the dex210 (v1.5 ish) and have struggled with lack of front end especially on corner exit when grip comes up.
I'm running the Dimec version B +8 chassis and wondering if anyone has compared it to the +8 metal chassis and if the front end any better with it? |
#2
|
||||
|
||||
I found that the standard type B DIMEC chassis can flex too much on higher grip surfaces, affecting the handling handling particularly during cornering. Depending on how high the grip is, I would recommend the Type B DIMEC20 or Aluminium chassis.
__________________
Team Durango Australia www.team-durango.com Proline Australia A list of option parts and other information for Durango vehicles. www.durangofansite.com |
#3
|
||||
|
||||
Great thanks, think that is exactly what i am experiencing. Car handles well in low grip but when grip comes up is very vague.
|
#4
|
||||
|
||||
You can also try a bit less front droop for more on power steering
__________________
Andrew Burghgraef Great Hobbies selling rf dex210 pivot blocks, pm me for details |
#5
|
||||
|
||||
For the sake of anyone else with these issues a +8 metal chassis and a -2mm lrc rear block gave me an extra lap and half on quite a big track so a massive improvement.
|
|
|