core parts are wrong in manual

[keenbutkrap]

i recently bought a core ready to run very happy with it i thought about getting some just in case spares for those moments when walls jump in your way
the part numbers in the manual all seem to be mad rat front and rear arms driveshafts all listed as mad rad or monkey
the correct parts are all approx 10mm wider each arm what parts should i be looking for it looks like i might have to bin the car if i break a £2 part
any help appreciated

[buggy#0]

Have a look on modelsport... they have a list of spares for every car, even discontinued. If not, give ansmann a ring. Also look at team c spares, they are rebranded ansmanns.
Remember, EVERY PART IS A SPARE PART!

[lordnikon]

The suspension arms are all macnum parts if you are struggling to find core specific ones. You're right that madrat etc ones are narrower than the required ones.

[Robbiejuk]

Originally Posted by buggy#0

Also look at team c spares, they are rebranded ansmanns.

Thats the other way round dude

Not sure what ansmann availibility is like currently, probably not the best, but you should be able to get the Team C Parts easy enough.

SMD Team c Part Numbers:

ABSTG2003 Suspension Arm front 2WD Comp. Truggy/SC Truck
ABSTG2004 Suspension Arm rear 2WD Comp. Truggy/SC Truck
ABSTG2005 Shock Stay front 2WD Comp. Truggy/SC Truck
ABSTG2006 Shock Stay rear 2WD Comp. Truggy/SC Truck
ABSTG2024 Turnbuckles 3x68/3x72 (6 pcs) 2WD Comp. Truggy/SCTruck
ABSTG2012 CVD Shafts (2) 2WD Comp. Truggy/SC Truck
ABSTG2013 Shock Shaft front 3x44.5 (2) 2WD Comp. Truggy/SC Truck
ABSTG2014 Shock Shaft rear 3x53.5 (2) 2WD Comp. Truggy/SC Truck

Should be able to order them from here.

http://www.smddirect.co.uk/index.php...id=50&page=all


Alternativley If you give those part numbers to your local modelshop they should be able to order them for you.

[keenbutkrap]

looks like they have put the cover of the core instructions on the sct manual makes spare part ordering a knightmare on the plus side modelsport say ansmann has a wharehouse full of spares so getting them should be ok just need the right numbers

[buggy#0]

Originally Posted by Robbiejuk

Thats the other way round dude

I know, I was just trying to say ansmann/team c are the same cars

[Robbiejuk]

Originally Posted by keenbutkrap

looks like they have put the cover of the core instructions on the sct manual makes spare part ordering a knightmare on the plus side modelsport say ansmann has a wharehouse full of spares so getting them should be ok just need the right numbers

Maybe try this manual for the X2SC

http://www.competitionx.com/pdf/vehi...pro-manual.pdf


Should give the right numbers I hope.