|
#1
|
||||
|
||||
GHEA Pistons now available
Hey
Ghea have now made the Magic Pistons for the Kyosho(10mm)shocks http://www.p-dubracing.co.uk/page_1267555681936.html Please note these have only been shipped from Sweden Today so please allow a few days for me to get them. Pre orders are welcome though Thanks Wraggy |
#2
|
||||
|
||||
Awesome
Time for an order this week |
#3
|
||||
|
||||
Grrrrr wish i knew there was some coming out lol.....
Cos i bought them Tamiya ones to try out on the car lucky i havent put them in the shock yet. I have to get some of these on order today
__________________
http://www.pbmracing.co.uk/ Kyosho MP9 TKI2 Team Orion CRF US edition & Team Orion CRF Alpha 5port Kyosho ZX-5 FS2 Kyosho RB5 SP2 LRP SXX TC & Brushless X12 Speed Passion |
#4
|
||||
|
||||
Yup great on my Schumacher shocks. Time to get Durango and kyosho ones
|
#5
|
||||
|
||||
Quote:
Goin to try the 1.3 & 1.2 i reckon see what they are like. Got the Big Bores coming next hopefully be here before Bury nest week to try too. Paul W, Are GHEA bringing any out for the Big Bores Pistons for the Kyosho at all??
__________________
http://www.pbmracing.co.uk/ Kyosho MP9 TKI2 Team Orion CRF US edition & Team Orion CRF Alpha 5port Kyosho ZX-5 FS2 Kyosho RB5 SP2 LRP SXX TC & Brushless X12 Speed Passion |
#6
|
||||
|
||||
Quote:
|
#7
|
||||
|
||||
Quote:
|
#8
|
||||
|
||||
Cheers Buster Order on it's way for the others too
__________________
http://www.pbmracing.co.uk/ Kyosho MP9 TKI2 Team Orion CRF US edition & Team Orion CRF Alpha 5port Kyosho ZX-5 FS2 Kyosho RB5 SP2 LRP SXX TC & Brushless X12 Speed Passion |
#9
|
||||
|
||||
3A pistons are 3 x 1.2mm , 3B are 3 x 1.1 for info.
I run 3 x 1.3 on the rear of the FS when the track has lots of small sharp bumps but no big jumps .... I think you need to go all 3 types but if just buying 2 types then go 3 x 1.1 and 3 x 1.2 |
#10
|
|||
|
|||
The pistons for the Tamiya work just fine in the Kyosho shocks.
|
#11
|
||||
|
||||
those of you who ordered pistons from me are being posted out to you tomorrow , they have arrived today and all acked and ready to ship.
thanks wraggy |
#12
|
||||
|
||||
Hi wraggy, im lookin at getting some pistons for some 3 racing shocks,10mm is ideal for the diamater, but they need to be 2mm thick where the clip sits, will the koyosho ones fit, or would i need another type??
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk |
#13
|
||||
|
||||
When i get my Big bores Ghea will have them ASAP =)
__________________
Daniel Persson Team Kyosho|Team Orion|AKA|DCD|GHEA Racing|Radiostyrt|Printhead|Nuclear-RC|bbqunltd|ToniSport|Spektrum |
#14
|
||||
|
||||
if the piston is to thick grind some off, if they are to thin use a shim,
__________________
Daniel Persson Team Kyosho|Team Orion|AKA|DCD|GHEA Racing|Radiostyrt|Printhead|Nuclear-RC|bbqunltd|ToniSport|Spektrum |
#15
|
||||
|
||||
Quote:
If they are slightly thicker than 2mm you can always wet/dry them down little or shim them up as we used the Tamiya ones on the Kyosho's but had to shim them slightly to fit
__________________
http://www.pbmracing.co.uk/ Kyosho MP9 TKI2 Team Orion CRF US edition & Team Orion CRF Alpha 5port Kyosho ZX-5 FS2 Kyosho RB5 SP2 LRP SXX TC & Brushless X12 Speed Passion |
#16
|
||||
|
||||
Thanks Carlin
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk |
#17
|
|||
|
|||
That surprises me, as the tamiya pistons have a smaller outer diameter, which give them A LOT softer feel in the shock. Remember that even a small difference in outer diameter has a massive effect as a lot more oil will pass around the piston.
Well in fact I tried tamiya pistons in yokomo shocks, and I measured diameter for losi, yokomo and tamiya pistons, and got dimension from elvo on the Kyosho shocks. The tamiya pistons in yokomo shocks didn't work as they felt way too smooth, even with the smallest hole diameters. Wraggy, do you have anything to put in yokomo shocks (no big bore)? As no one seems to know what the different types of yokomo pistons really are, it would be nice to have a decent set for them. But maybe the kyosho ones fit allright, if these shocks have the same shaft diameter (metric). |
#18
|
|||
|
|||
First from what I remember there wasn't such a big difference in diameter.
Second how is that a bad thing ? The pistons are supposed to give less pack so that's even better IMHO. |
#19
|
|||
|
|||
For example I would use losi red piston with oil30. Even with the 1.1mm holes pistons from tamiya, with oil 30, it still feels softer. So if I want the feel and pack as losi red pistons, there is no way to do that with tamiya pistons. (in yokomo shocks!!)
Less pack is good, if you want less pack of course But that's not my point. I just want a decent set of pistons for yokomo shocks (cause it doesn't exist), and tamiya pistons are not usable for that. Maybe kyosho pistons are, because they seem to have the same outer diameter. (losi pistons don't work as their shaft diameter are bigger, so they sit loose on the yokomo shaft) |
#20
|
||||
|
||||
Quote:
|
|
|