|
#1
|
|||
|
|||
help with pinion size
hi there im running my x10 indoors and it keeps unsoldering its wire from the motor im runnind standard spur gear and a 17 pinion is that too small please help me cheers decided to stay with my x10 now so NORTHYwill be keeping busy helping me hopfully if he dont mind lol
|
#2
|
||||
|
||||
Not a problem.
What wind motor are you using? Have you got all the air intakes cut out in the shell? Also you need to cut the back of the shell out so air can get out. I can take pictures if you want. G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#3
|
|||
|
|||
cheers northy its a 10x1 reedy pt i have all the holes open and more and drilled the back out m8
|
#4
|
||||
|
||||
I'd try an 18 tooth.
Do you have a fan fitted? Do you make sure the motor is as cool as possible before you go on to race? G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#5
|
|||
|
|||
i dont have a fan fitted and i didnt worrie about the motor been cold will do from now on where do i get the little fans from what will fit in to my pred cheers
|
#6
|
||||
|
||||
Loads of fans on Ebay. Some use the ones that screw to a heatsink that clips to the motor.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#7
|
||||
|
||||
an idea ive found really good through the hot weather is to cut the front window out completely,i used to do this on other cars as well,touch wood,i dont seem to have problems desoldering,also its quite nice for the motor in general and the speedo,
trekkker(stu)
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#8
|
||||
|
||||
I have part of the front window cut out.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
|
|