CR2 carpet set up please!

[rc_penguin]

Hiya all,

Im looking for a base carpet set up for my CR2 in preperation for petit rc in January, I have an LHD kit with idler mod if that makes a difference

Thanks in advance,
Will

[V-Rossi]

I would suggest this:

Front:
Blue spring, 32,5wt, red piston, 1mm limiter
Shock #2 on tower, #2 on wishbone
0-15gr in nose, camber link 3-B
VLA long

Rear:
Red spring, 30wt, red piston, no limiters
Shock #2 on tower, #2 on wishbone
+/- 120gr under battery pack, nothing under motor
Camber link 2-B + VLA short or link 3-C + VLA long, for you to try
Wheel base long, 2 gold washers under ball stud on hub

I don't know which motor you are running and how the track will look like, depending on this you can experiment a bit with rear VLA, front spring and rear wishbone shock position.

When using a 7,5 motor, I would suggest 21/75 gearing or do the motor plate mod and use 25/78.

[V-Rossi]

Double post, please delete

[rc_penguin]

Brilliant! Thank you very much