|
#41
|
|||
|
|||
The only differences between the SR1 and SR1+ are the + has slightly better fets, faster motor limit and comes with a fan. As far as features (timing ect) are concerned they are both the same, you can plug the fan into the SR1 too if you want.
I run an SR1 in my 2wd with a 6.5 V2 without a fan just fine, you'd be better with the fan in 4wd/shortcourse with big motors. I never really play with the current limit on my Vampires, they are smooth/drivable enough I've never felt the need to |
#42
|
|||
|
|||
Quote:
Cool, thanks for clearing it up a bit, really minimal information out there on these. My only other thought was with all this big hoo haa people are putting on resistance is the SR1 has more than the SR1+. Although I'm about 99% sure that it would be impossible for pretty much anyone to pick up the difference. Might order it next week. |
#43
|
|||
|
|||
Well I ended up buying an SR1+, wasn't that much extra over the SR1 so I thought why not.
Can't wait for it to get here to run it. |
#44
|
||||
|
||||
You'll be happy with it I'm sure, I've been very impressed with mine this year, very smooth, but as fast as anything out there.
__________________
Model Junction, Boughton Raceway. |
#45
|
|||
|
|||
Cool, any ideas when the website will be up?
Yeah, biggest hurdle right now is the weather, just cant do anything, either always raining or raining and windy. Can't get a gap big enough for the track to dry out a bit to get on it. |
#46
|
|||
|
|||
Another thing which was just bought to my attention (something I completely forgot to check).
Is there any plans on these ESC's becoming ROAR approved? |
#47
|
|||
|
|||
Just received my SR1+, pretty happy with it so far.
How do I change the LVC? |
#48
|
|||
|
|||
Since there is virtually no other source of informtion out there for these I'll add this here.
The LVC on the SR1/SR1+ is set at 2.8v and is NOT adjustable. |
#49
|
|||
|
|||
2.8volt per cell in LIPO as per email reply I sent to you (I think) late last week...
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#50
|
|||
|
|||
Quote:
I understood it to be 2.8 per cell, I should have clarified it. I still don't quite understand why it's so low, it's the only negative thing I have on it, I have nothing but good things to say otherwise. I'll probably just run an external alarm or something, I was going to sell it but I know with this, I wouldn't get enough money back to buy another decent ESC. |
#51
|
|||
|
|||
Quote:
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#52
|
|||
|
|||
Quote:
Although I can't say I've ever had that issue though, of the voltage sagging that far. I'm not trying to come across as a complainer as it is indeed a fine ESC, just wanted to understand why it's so low and non adjustable, havn't seen another modern ESC like it. |
#53
|
||||
|
||||
Hi guys need abit of help I bought the vampire sr1+ and a 6.5t v2 motor and put it in my durango desc210r truck but I have a major problem with the motor over heating I've dropped the pts down to its lowest and dropped pinion down to 16t!!! With a 87 spur the truck is running mm4 setup please any advise to get the temperature down even more thanks Steve.
|
#54
|
||||
|
||||
Has there been anything updated on the speedo since its release in 2011 ?
__________________
|
#55
|
|||
|
|||
Hi,
Does this speedo have amp limiting?.....like the GM genius? |
#56
|
|||
|
|||
Jason A - as yet there has been no requirement to make any updates or changes to the factory supplied software, so all models still run Version 1.0.0, not sure if that is a good or a bad thing, people always like "updates" and fiddling around with stuff I guess (its in our nature) but on the other hand no patches, error corrections or updates have been required for it thus far, meaning no one has "had" to make updates simply to get the best out of their equipment since none have been needed..
Simon - the SR1 and SR1+ both feature Current Limiting (in terms of a percentage of power - 80/90% etc) and also feature the PTS (Power Timing System) which are the two provided ways of adjusting and controlling the power delivery Hope that helps....
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#57
|
|||
|
|||
Thanks Darren (DMS)
Great customer support
Love the SR1+ Fast Smooth & Easy to Setup |
#58
|
||||
|
||||
Hello all.
So is the ppl still happy with there Vampire SR1+? Best Regards. |
#59
|
||||
|
||||
Very happy
__________________
Model Junction, Boughton Raceway. |
#60
|
||||
|
||||
Yup, I have 2 now and the SR1 in my 2WD
|
|
|