|
#1
|
||||
|
||||
CAT KF Setups
Last edited by James; 09-01-2014 at 03:06 PM. |
#2
|
|||
|
|||
James i cant get this to enlarge :-(
|
#3
|
|||
|
|||
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#4
|
|||
|
|||
my wet astro set up
my set up from weekend
http://www.petitrc.com/setup/schumac...Wright_201312/
__________________
Touching cloth clothing |
#5
|
||||
|
||||
Dude, it's too small to view. Any chance you can make it bigger?
__________________
SHRCCC Committee - Membership secretary & Treasurer. Amature racer, professional crasher. |
#6
|
|||
|
|||
Petit RC have a great database of setups here:
http://www.petitrc.com/setup/schumac...rCougarKF.html I've added a wet Astro setup from RHR which was great, would recommend it for people looking for a starting point for people running on low grip tracks.
__________________
Yokomo - LMR |
#7
|
||||
|
||||
Cheers Tom, much appreciated. Are you spacing the steering bellcrank up any (and matching bump steer spacing on knuckle arm) on that damp rhr setup?
.... And, did you leave the rest shocks in front of the wishbone?
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
#8
|
|||
|
|||
Yeh, I've got 4mm under the bell cranks and 4mm under the outer Ballstud.
__________________
Yokomo - LMR |
#9
|
|||
|
|||
Hi
What is the idea of the washers under CTR as I have not noticed much bump steer on a SV2 which think shares the same set up as the KF CARB |
#10
|
||||
|
||||
I believe it smooths the steering
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#11
|
||||
|
||||
Worksop 5/1/14 KF Setup.
Track seemed slippier this round to me. 3 degrees rear camber helped a lot also 1 degree rear alloy blocks. Finished A7. Last edited by James; 09-01-2014 at 03:14 PM. |
#12
|
|||
|
|||
My KF setup from Caldicot RC Racers club night last night
This thing is awesome! Ball diff really transformed the car, with the gear diff I was really struggling to get the power down but with the ball diff it was so smooth and easy to drive, it really felt like I could push it hard and the car just kept giving https://www.dropbox.com/s/xqlkc38mx8...2017012014.jpg
__________________
Current rides: Team Associated B6.1 Kyosho RZ7 Kyosho ZX7 All kept going by PBM Racing |
#13
|
||||
|
||||
Can someone please let me know what rate the kit springs are on the kf.
Cheers.
__________________
Team associated b6 Tekno Shortcourse truck Tamiya lunchbox Sworkz Bury metro |
#14
|
||||
|
||||
I think they are 4 front and 2.5 rear.
__________________
SHRCCC Committee - Membership secretary & Treasurer. Amature racer, professional crasher. |
#15
|
|||
|
|||
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#16
|
||||
|
||||
Thank you,
Gaz just a quick one to ask how well did you find your kf at southport indoor. Ran mine there today on its first time out in near kit set-up with the rear alloy block upgrade, Just felt as if i couldnt push to hard through the corners,having to back off a little.new cut staggers and blocks both in yellow,grip wasnt an issue but just felt unstable. Cheers Dave
__________________
Team associated b6 Tekno Shortcourse truck Tamiya lunchbox Sworkz Bury metro |
#17
|
||||
|
||||
KF Setup for Herts Electric circuit
Will be running the KF at Herts this weekend at the Mid South regional. Never run at this circuit before. Looks like it will be dry. Does anyone have a setup for this circuit? Is it Low/Med/High traction?
Cheers, John |
#18
|
|||
|
|||
All 3 if damp in the morn it will be slippy then grip comes up as it drys but then grip fades as sand comes up
__________________
Touching cloth clothing |
#19
|
|||
|
|||
sv 2 rear wishbones
guys
i am building a kf and put sv 2 rear wishbones to length the car. What spacing should i put there and also the pin is short is it worth getting the sv2 pin aswell? thanks for help lee |
#20
|
||||
|
||||
I would try it in stock setup first before changing anything too drastic, Tom C's setup is awesome... (The std chassis one)
|
|
|