|
#1
|
||||
|
||||
Team Tekin Q&A
Hey Guys,
Randy Pike from Tekin. I'm here to help answer any technical questions you may have about our products. As you know we have some of the Predator guys using the Tekin RS Pro and Redline motors in their cars. If you have any questions, please ask away! |
#2
|
||||
|
||||
well, let's start then
I do have a Tekin R1 Pro, but it is actually mounted in my onroad Tamiya 416. In my Predator I have a MambaMax and CC 5700KV motor actually, but I was already considering a switch. Which motor would do great in the Pred ... for driving on large dust tracks, or on grass? Would a 6.5 BL-motor be sufficient or suted? |
#3
|
||||
|
||||
Great,
On the large dusty track the 6.5 would be my first choice. It's got loads of power and is easy to drive smooth on the bottom end. It can be adjusted to gave a huge top end as well when coupled with the RS. For the Pred and any other 4wd offroad car running mods I recomend the Pro versions either R1 or RS Pro. If you have the R1 Pro and want to use a sensroless motor my choice would be the 362 or the 448. The 448 being my first choice. I should be getting a Pred myself to run here soon so I'll have a lot more input for you. |
#4
|
||||
|
||||
for grass tracks, the 362 is definately the one to go for, the 448 is a little softer, so may not be aggressive enough on the grass.
Hey Randy, welcome to the world of oople!!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#5
|
|||
|
|||
Hi Randy,
I haven't done much background research, so apologies if this is a 'dumb' question - but can I hook up the R1 (Pro) speedo to my Mamba Max 5700kv motor (sensorless)? Can I hook the speedo up to my laptop for altering settings etc.? Great looking products BTW. Cheers Al |
#7
|
||||
|
||||
and if I had the choice ... should I choose a sensored or a sensorless Tekin BL-motor?
(As the R1 Pro can run both and budget being the only argument) |
#8
|
||||
|
||||
I would go for the 5.5 as you can always turn the power down a little, whereas the 6.5 can, on a big track in 4wd, feel a little lacking. If you turn the limiter down on the ESC, it softens up the power delivery on the 5.5 for dirt, plus you can go to a softer throttle profile too.
Alfonzo, yes, you can hook up any brushless motor to the R1Pro and the RS, the major difference is, the RS can use the Sensor harness. Yes, if you have the hotwire, you can connect the R1 to your laptop, update the firmware, have much finer adjustments to the different adjustments too.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#9
|
|||
|
|||
I'm still a little confused. So can the Pro run sensored motors, or just the RS? Is the Pro better spec? (in terms of resistance, etc). I want the option to run both sensored and sensorless if possible.
|
#10
|
||||
|
||||
the RS and R1 can run both sensored and sensorless motors.
The RS has the sensor wire port The Pro versions of both have lower resistance and can take a much hotter motor, the non-Pro version are good to about a 5.5
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#11
|
||||
|
||||
The R1 Pro will run sensored and sensorless motors, you just don't hook up the sensor wires (on a sensored motor) as there's no where to plug them in because you don't need it.
I run my R1 Pro with a Novak 5.5R with no problems at all once you're running the latest firmware which can be uploaded by anyone with a Hotwire, may already be installed if it was a recent purchase.... Mart
__________________
RB5 - LRP - Spektrum - Atomic Carbon ZX5-SP Ion - Tekin - Novak - Spektrum - Atomic Carbon |
#12
|
||||
|
||||
the previous posts are kinda confusing to me:
Quote:
I have a R1 and I do hook up a sensored BL motor with the sensor cable. Also, may I repeat my question? Is there a reason to choose Sensored over sensorless in terms of performance with the Tekin-esc and -motors? |
#13
|
|||
|
|||
I'm still a tad confused because I'm being a plank. And how much are these Hotwire things? Do they come with the speedo?
|
#14
|
||||
|
||||
No, the RS has the sensor port, the R1 doesn't.
Sensored gives a little better feel at the lower end with mod motors, and with 'spec' motors, makes them faster. Sensorless is very good with mod motors. the RS can run as a sensorless or sensored speedo. the R1 can only run as sensorless
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#15
|
||||
|
||||
Quote:
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#16
|
||||
|
||||
the hot wires are about 35 quid (ish) or were when i got mine and unfortunatly dont come with the speedo, good thing is that they work with all tekin speedos as they simply connect to the reciever wire so they are a buy once and use with every tekin you buy from now on , also if you have a laptop it makes it a lot easier to adjust your speedo track side using the sliders rather than counting lights like on other makes
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#17
|
||||
|
||||
The Hot wire is dead easy to use, and really helps you fine tune the Speedo to the track and to get the best out of the motors your chose to run
__________________
Team Associated- HobbyWing- Reedy- CML |
#18
|
||||
|
||||
well, I do run a sensored BL motor with myTekin ESC so I must be mistaken. It must be a RS then, and not a R1.
|
#19
|
||||
|
||||
Lowie, DCM and the others are right. If there's a sensored port on the esc it's the RS.
If you have the RS you can run both sensored and sensorless motors. The fact that was also stated corretly was that with the RS you have the ability to choose between Sensored only drive OR Dual mode which is a sensored start and sensorless operation afterwards. My personal current ride is a BJ4WE with either the Tekin Redline 6.5 or the 5.5 depending on traction. When setup properly I'd put our 6.5 up agains most others 5.5s. The Hotwire gives us an advantage over the others with easy tuning, updating your software, and soon user programable/storable throttle profiles. When we make an improvement, you only need to download the FREE software, not a new esc. Jimmy, thanks for making it a sticky it's much appreciated. Hit me up when you get time: Rpike@teamtekin.com Sorry for the delayed response guys I had the wrong email listed. |
#20
|
|||
|
|||
yup .. a real benefit of the Hotwire (currently unrivalled by any other competitor) is the ability to download new RS software when Tekin releases it (1st by downloading on to your notebook) onto your RS. this means new functions, customisations, etc .. it's like a firmware update, but doing it yourself.
but the ONE big thing i like about my RS is that it allows you to start and complete a race even with a faulty or missing sensor lead! it switches to the hybrid mode. woooo ... friend of mine had a 5.5 and 6.5 BL motor that couldn't run on either his GTB or Sphere. they were as good as paperweights, really. tried them in the RS and they were as good as new. |
|
|