|
|
#1
|
||||
|
||||
Show us your YZ-2
Thought I'd start this off...
Just finished shot: One can wonder so I can run it while my main shell is being painted. Install: Still a bit of room to play with, I may rewire it to get receiver flat, rotating speedo. Need to take some proper shots before it gets too used.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- Last edited by neallewis; 19-01-2015 at 03:10 PM. |
#2
|
|||
|
|||
Here is mine after it's first meeting yesterday. Shell is on it's way from the painter, will stick a post up once it's mounted.
I am going to get rid of the mounted for body clips, but the way my wires stick out my motor, they push my shell up a little so they have been quite handy in keeping the shell down. Going to probably upgrade to the Sanwa 471 receiver for more room also.
__________________
Ardgay Models Schumacher CORE-RC Hobbywing Mark One Designs Last edited by Allan1875; 19-01-2015 at 11:17 AM. |
#3
|
||||
|
||||
Great looking guys. Will post mine up here when I get the body back from painting. Car is built and (almost) ready to go.
__________________
Numquam cedunt victores, numquam ignavi vincunt. |
#4
|
|||
|
|||
what an amazing looking buggy! I just have to convince my wife to let me get another buggy since I just bought a Team C TM2 and a BMAX2 V3 haha
__________________
PR Racing UK Absima UK |
#5
|
||||
|
||||
Will do when i pick it up and build it Neil
|
#6
|
|||
|
|||
Here's mine hope it goes as good as it looks
|
#7
|
||||
|
||||
On Track
My YZ-2 at Batley on Sunday. Photo courtesy of Neil Lewis - Thank you
Bodyshell is new Penguin "No-fin" YZ-2 shell. Looks superb - Thanks Steve Haskins
__________________
I've got Araldite and a Swiss Army Knife - what more do I need? Yokomo YZ-2 No 4WD because nothing lives up to my original Optima. Until now maybe?... |
#8
|
||||
|
||||
Ready to roll at Mendip and Swindon...
__________________
Yokomo YZ-2 |
#9
|
||||
|
||||
Paint by Andy at Shilly Shells, hopefully will be on a track in a couple of weeks
|
#10
|
|||
|
|||
Here is mine, ready for a regional race tomorrow
Last edited by kyfran95220; 14-11-2015 at 04:51 PM. |
#11
|
||||
|
||||
|
|
|