|
#21
|
|||
|
|||
Hi...i am a new user here. In my case one toro I reverse connected, the second failure was after over a year of running in 4wd, and I exceeded its component tolerances, running a hot motor on a very sunny day on longish grass, and it blew in my regional final as I was moving up the field. Yup it let me down, but I had my moneys worth up to that point.
|
#22
|
||||
|
||||
Naff all in it.
The SkyRC ESC's are brilliant because they're affordable. I wouldn't ever buying a LRP/Nosram/Orion, they're SO expensive and after trying them there's no performance in it what so ever. I've even ran REALLY budget ESC's like the Bullistorm 120's that were around a few years ago, I think they were £16 a go and even accepted the Hobbywing software! I run an aluminium cased SkyRC now. It's affordable but has the lovely aluminium casing which is robust and keeps my electrics cool
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#23
|
|||
|
|||
have you got a link to the alloy case one ??
|
#24
|
|||
|
|||
http://www.skyrc.com/index.php?route...product_id=206
http://www.rcmart.com/ts120a-procomp...Path=1560_1021 (I have shortcuts for it, as it's quite likely to be my next ESC......) |
#25
|
||||
|
||||
http://www.banggood.com/SKYRC-TORO-T...h-p-83221.html
http://www.banggood.com/SKYRC-TS120A...-p-970353.html http://www.banggood.com/SKYRC-Progra...-p-937725.html http://www.gearbest.com/multi-rotor-...pp_340027.html http://www.gearbest.com/multi-rotor-...pp_340026.html http://www.gearbest.com/multi-rotor-...pp_340767.html
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#26
|
||||
|
||||
You can get the plastic case one cheaper on eBay but I can got rhe alloy case of from banggoog great service
__________________
Fray Bentos |
#27
|
|||
|
|||
SkyRC Toro ESc
Gents,
I have a couple of HW v3.1 and looking at what you are writing these "cheaper" esc look bang for your buck good. Can I use my HW program card with this esc and also update the software to the latest HW version using my laptop? They look really well made and if they "fail" after putting hot motors out of spec in them, then that isn't to bad. Any help you can give is appreciated. Cheers
__________________
Lee Willows Moss Models Garcia Graphix |
#28
|
||||
|
||||
Depends what cheap ESC you decide to go for Lee.
I've previously purchased some of the £16 120a ESC's on ebay and I've put the Hobbywing software on no problem.
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#29
|
|||
|
|||
Cheap hobbywing clones
My hobbywing v3.1 has just died so went and purchased a cheap hobbywing clone.
I've previously had the X-car 120amp from hobbyking and that lasted 2years in my Durango410 and then sold It on. It ran faultless. This one pictured was only £16 with free postage From eBay. It didn't say if it was a hobbywing clone or it ran hobbywing firmware but just by looking at the pics and it's internals I went and bought it. Plugged in the program card and it had 205mod hobbywing firmware installed, so just updated it to the 930mod (latest update). I've tested it in the tm2 and it's very smooth and punchy. All the wires come presoldered to the esc tabs so no messing about. I've got a v3.1 hobbywing in my tm4 and can't see any difference to the cheap version. Link to eBay.. https://www.ebay.co.uk/itm/131983190700 It says it's uk based but I got mine within a week. You can get it £11 from Asia if you are not worried about how long it takes to get here. Quite frankly, it's mind boggling how cheap esc are now. How the fook can they manufacture it for £11 send free through the post and make a profit??? Last edited by jpmatrix; 11-11-2016 at 01:06 PM. |
#30
|
|||
|
|||
The mark up on rc electronics is huge when compared to most other electronics. Imagine if orion/LRP/reedy made PC motherboards, they'd cost thousands!
|
#31
|
|||
|
|||
Chinese translations
|
#32
|
||||
|
||||
Quote:
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#33
|
||||
|
||||
hobbywing software will go on these cheapy ESC
but it is the earlier V2.1 series not the later v3 esc as Neals previous post regards dave |
#34
|
||||
|
||||
Quote:
I've you have spare Hobbywing v3.1's not sure why you'd want to regress to these v2.1's though? The v3.1 is much better.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#35
|
||||
|
||||
It all depends what it is that you're looking to do with it. Running off road, primarily pretty close to blinky, I'd guess that there are a lot of speedos that will be "OK".
However, 18 months or so ago, I was asked to do some speedo testing for a manufacture / distributor who was looking at introduce an ESC. It came from one of the bigger OEM companies in China, and there is no doubt that it "took inspiration" from Hobbywing v3.1 (It wasn't one of the 4/5 Sky RC speedos that are available from different brands!!). All I can say, is running modified touring car outdoors it needed a bit of work!! The power delivery wasn't pretty, it would light up wheels pretty much when ever you wanted to. On the one hand you could say "wow" look at the power it has, but on the other hand there was no doubt that the lack of finesse was making it slower around the track. I did this testing comparing this ESC against Hobbywing v3.1 and Much More Fleta Pro - and honestly both of those were night and day ahead. I haven't seen any clone ESC's that will run any of Hobbywing's V3 and above software, just that from the v2 - which would have stopped development 5-6 years ago.
__________________
Matthew White |
#36
|
|||
|
|||
Quote:
So would you say that having an original hobbywing v2.1 with its latest firmware at the time have a different power delivery to a cheap clone that runs the same firmware? To be honest, I couldn't notice the difference. The clone esc I tested seemed very smooth and progressive in the tm2 in comparison to my tm4 which has the v3.1 which imo is the best speedo I've owned. But then again, off road and on road racing is like night and day. |
#37
|
|||
|
|||
Program card
Hi guys
What program card did you use for these cheap esc? Thanks |
#38
|
||||
|
||||
hobbwing or clone of LCD multi-function program box
hope link works, give you some idea may need to update firmware in box before use http://www.ebay.co.uk/sch/i.html?_od...cd&_sacat=2562 |
#39
|
|||
|
|||
Thanks
Thanks
How do you update the firmware New to this brushless lark not raced for some time |
#40
|
||||
|
||||
get a box first it may not need updating I it does its easy to do after downloading HW software from internet its easy even I can do it !!
dave |
|
|