|
#341
|
|||
|
|||
Thanks tyre man
What's the sacs front end only ever heard that term on schumachers |
#342
|
|||
|
|||
The Schumacher Active Caster System. They did a losi version as well as the one for the cougar. Not sure if they made them for any other cars?
|
#343
|
|||
|
|||
Cool never knew that
|
#344
|
|||
|
|||
I remember it had a shock tower and wishbones in the kit but not sure if there was anything else. There is not a lot on the net about the XX version.
|
#345
|
||||
|
||||
**This is a test to try different methods of uploading pics, other than Photobucket**
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ Last edited by Dandare; 12-02-2017 at 09:05 PM. |
#346
|
||||
|
||||
Decided to add the slipper and one way plus tidied up the wiring and added two schotkey diodes. Only need the tie rods and paint my shell and its race ready done with all identical equipment (I did use Yok shocks) when I raced it for the two events.
RC10 tidied up wiring and added receiver plus added two schotkey diodes so now done to identical as when I raced it. Bosscat added front oneway ujs, rear layshaft bearing silver alloy mounts, alloy rear ujs and now deanodising the eccentric bearing housings from blue to match the gearbox silver colour. Added esc, wired it up (only used stick packs as was only for 24 hr events). Awaiting receiver to be mounted and painted shell then almost done to how I had it, but still am after the alloy gearbox surround that sits around the motor, Ibelieve its the Procat one to finish it off.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS Last edited by Welshy40; 27-02-2017 at 05:09 PM. |
#347
|
||||
|
||||
Where did you get the Tekin 410K speedos from??
__________________
TLR, Screwz4RC, Spektrum, Horizon Hobby, Trinity, Trishbits, Racer, RichPaint, RDT products, Sanwa, Zen Racing, Silverback Lipo's http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#348
|
||||
|
||||
Had some for ages, Kept the ones I got from my sponsor before the worlds warm ups after a nice discussion with the owner of Tekin, think ive now got five 410ks. Ive an esc for every car (Lazer ZXS, RC10B2, Yokomo YZ10 and Lazer ZXRR but a Tekin 410s for the ZX), basically putting everything i used in the exact car when I competed with them including motors, servos & receivers.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS Last edited by Welshy40; 27-02-2017 at 09:38 PM. |
#349
|
||||
|
||||
near original avant and a few re re
|
#350
|
||||
|
||||
After many many years i got one :-)
|
#351
|
||||
|
||||
Here's my finished Losi XXcr Kinwald edition.
__________________
TLR, Screwz4RC, Spektrum, Horizon Hobby, Trinity, Trishbits, Racer, RichPaint, RDT products, Sanwa, Zen Racing, Silverback Lipo's http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#352
|
||||
|
||||
Wow that looks really good. Old Kevin Moore colours. Lol
|
#353
|
||||
|
||||
Near-new Kyosho Turbo Optima Mid, fresh paint and Marwan repro-body and decals:
__________________
___________________________________________ In order of appearance: Kyosho Turbo Ultima Kyosho USA-1 Axial Scorpion Axial Exo Team Durango DEX210 Team Durango DEX410 2010 Tamiya XV-01 Pro Team Durango DEX408v2 Schumacher K1 Schumacher KF Yokomo B-Max IV.3 Factory Kyosho Turbo Optima Mid Last edited by DangerCow; 09-04-2017 at 01:50 AM. |
#354
|
||||
|
||||
Very nice
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#355
|
||||
|
||||
Here I have a long-wheelbase Kyosho Optima Mid Custom Special to go with my short-wheelbase Mid you can see above:
__________________
___________________________________________ In order of appearance: Kyosho Turbo Ultima Kyosho USA-1 Axial Scorpion Axial Exo Team Durango DEX210 Team Durango DEX410 2010 Tamiya XV-01 Pro Team Durango DEX408v2 Schumacher K1 Schumacher KF Yokomo B-Max IV.3 Factory Kyosho Turbo Optima Mid |
#356
|
||||
|
||||
Turbo Mid coming together, and an AYK Pro Radiant kit
|
#357
|
||||
|
||||
NRC32.
|
#358
|
||||
|
||||
Very nice, ive got the first couple ever made by someone other than the designer Nigel Ratcliffe, however im doing some tinkering and will post one when finished.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS Last edited by Welshy40; 04-05-2017 at 08:49 PM. |
#359
|
||||
|
||||
Last edited by sandkil; 01-03-2018 at 11:36 AM. |
#360
|
||||
|
||||
Finally got to this stage |
|
|