|
#1
|
||||
|
||||
CR2 carpet set up please!
Hiya all,
Im looking for a base carpet set up for my CR2 in preperation for petit rc in January, I have an LHD kit with idler mod if that makes a difference Thanks in advance, Will
__________________
Will Johnson |
#2
|
||||
|
||||
I would suggest this:
Front: Blue spring, 32,5wt, red piston, 1mm limiter Shock #2 on tower, #2 on wishbone 0-15gr in nose, camber link 3-B VLA long Rear: Red spring, 30wt, red piston, no limiters Shock #2 on tower, #2 on wishbone +/- 120gr under battery pack, nothing under motor Camber link 2-B + VLA short or link 3-C + VLA long, for you to try Wheel base long, 2 gold washers under ball stud on hub I don't know which motor you are running and how the track will look like, depending on this you can experiment a bit with rear VLA, front spring and rear wishbone shock position. When using a 7,5 motor, I would suggest 21/75 gearing or do the motor plate mod and use 25/78. |
#3
|
||||
|
||||
Double post, please delete
|
#4
|
||||
|
||||
Brilliant! Thank you very much
__________________
Will Johnson |
|
|