|
#1
|
|||
|
|||
Mardave g2 brushed motor
Just wondering which is the best way to clean out these motors after a days racing.Ive heard some people wash them out with soapy water ,others just use degrease spray ect.
Cheers |
#2
|
||||
|
||||
Brake cleaner then a drop of wd40 on the comm
or you can dip and run them in warm soapy water then use the spray
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
#3
|
||||
|
||||
Do NOT water dip a G2 motor,as you WILL ruin the brushes in it. Clean the com with either motor cleaner or some WD40 on a cotton bud.The new G2 doesn't like water at all,so the old tricks of bedding in the brushes by water dipping just doesn't apply here. If you really want to bed in the brushes,just run the motor for around 15 mins on a 3V supply,it does the same job.Then clean the com,and wipe with a WD40 cotton bud,and away you go.
__________________
Kyosho Inferno US Sports:- RB WS7 III engine,HN 2047 pipe & HN13mm shocks. |
#4
|
||||
|
||||
I have tryed a new method (Not cleaning it at all)
And it seems to work better than cleaning it!!! Just squirt wd40 in before each run and off you go. 1st leg of the finals on meeting four! Avg Best 1 Nick Cooper Junior 21 / 303.35 14.44 13.61 2 Gary Crisp Senior 21 / 309.87 14.75 13.77 3 Becky Wilson Junior 21 / 310.89 14.80 13.77 4 Mark Stevens Senior 20 / 307.20 15.36 13.85 5 Thomas Lord Junior 19 / 309.29 16.27 15.11 6 Barry Gregory Non-Member 18 / 302.37 16.79 14.96 7 Wayne Eley Non-Member 17 / 304.74 17.92 15.44 8 Paul Kelsall Non-Member 15 / 312.53 20.83 14.80 2nd leg (Duff pack of cells!) 1 Gary Crisp Senior 22 / 313.17 14.23 13.50 2 Becky Wilson Junior 22 / 313.66 14.25 13.46 3 Nick Cooper Junior 21 / 311.75 14.84 14.11 4 Mark Stevens Senior 20 / 306.80 15.34 13.94 5 Paul Kelsall Non-Member 20 / 314.44 15.72 14.60 6 Thomas Lord Junior 19 / 310.21 16.32 15.29 7 Wayne Eley Non-Member 17 / 303.80 17.87 15.78 8 Barry Gregory Non-Member 12 / 308.30 25.69 15.58 Now to see how long the motor lasts now. |
|
|