|
#1
|
||||
|
||||
Help with build!
Hi guys, as im new to all this im totally lost with some things.
THIS QUESTION IS SORTED!!!
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#2
|
||||
|
||||
Also how do the hangers fit? do i need to fit smaller turnbuckles? looks like i do to me but would rather have this confirmed.
Also theres longer turnbuckles and a medium length pair do these go at front? if so which way around. Thanks
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#3
|
||||
|
||||
another problem is when my wheels are level my drive shafts jusy about go in my outrives?
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#4
|
|||
|
|||
Chris, depending on which ballcups you settle on, yes you will need to use the shorter trunbuckles ion the rear with E-Speed hangers
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#5
|
|||
|
|||
Quote:
This is probably what you trouble is........
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#6
|
||||
|
||||
chris
E speed hangers bolt where kit ball studs should be, ball high is where most run em, yes you need shorter links. Is your gear box in low posistion? You may need the longer axles, but thats normally on full droop.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#7
|
||||
|
||||
Cheers for help! yes id put spacers on outside thanks!
Also gearbox is low as set up sheet in the ellis kit Im using all the turnbuckles that come with the ellis kit aswell as the ends that are longer than ae ones. Cheers ill give that a go! Chris
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#8
|
||||
|
||||
More problem!
when I put servo forward it hits the servo saver when wheels are straight, would you dremmel the servo saver down? using a savox Chris
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#9
|
||||
|
||||
ALL SORTED!!
just electrics to go in!!!!! Chris
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#10
|
||||
|
||||
Quote:
I have meet the same "problem" with the servo arm. Check your tool box, maybe u will find an alloy futaba servo arm. That avoids the problem
__________________
Regards, Peter Kovac- team RS Concept Slovakia |
#11
|
|||
|
|||
Are we talking about ther servo saver (ie bellcranks) or the servo horn here?
Indeed the servo horn on a Savox servo may well catch the front chassis area sue to the Savox servos being slighly larger in this area. Removal of some material in this area will cure this or using an alloy servo arm (slimmer than the stock AE plastic one) will also work.....
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#12
|
||||
|
||||
It was my servo saver hitting the case of servo, I simply removed bulky sticker now it's fine!
Felt like it was hitting alot at first but obviously not. By the way why no shock bladders in the ae shocks?? Oh my god there hard to get right. Over an hour on one shock so far and can't get the rebound right
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#13
|
|||
|
|||
Get the AE bleeder caps. It makes AE shocks much easier to get each shock the same.
|
#14
|
||||
|
||||
Quote:
Got them! must be somthing im doing wrong but think ive had enough. losi shocks for me. Chris
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#15
|
||||
|
||||
Chris you dont get bladders with ae shocks,
They are emulsification shocks , and are piss easy to build, i can do a set in 5 mins tops, all the same. You dont need rebound on em either, they shoul pull back in on full extension and come out slighty on compression. Rebound is an elec tc thing..... Finally you dont need losi shocks, build them ae ones right, or second tnoughts buy ur losi ones and give me the ae ones lol
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#16
|
||||
|
||||
Quote:
You can BUY the AE ones??
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#17
|
||||
|
||||
Heres were im getting confused, in instructions it says shaft should come out 16.3mm after being compressed, this to me is rebound??? so do i disregard them and just do them so only a small ammount pops out? say 3 mm??
Chris
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#18
|
||||
|
||||
buy (spit) nah got3 sets lol id only be upgrading my old set to new gold shaft ones.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#19
|
||||
|
||||
Quote:
Im getting closer to sorting these out (i think)
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#20
|
||||
|
||||
chirs i can get you in 2wd for sunday at worksop, but if u take slot u got to turn up.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
|
|