BL Mini Leo-X (Atech)

[Thomas P]

So far i have only been running this little beast with Stock chassi and DynoMAX 8000rpm/v motor and a TEKIN Mini R esc.

On my Mini FOFF there is a few upgrades...

- Ball bearing on the whole car
- Orginal option parts Wheel axles (app 10mm wider on each side) alu hex, can use other hex to..
- Orginal option oil alu dampers
- CF strength motor mount,the stock one flexes to much, so a little cf plate between motor and mount is placed for less flex
- AE RC18 11T piniong
- 2s2p 1800 mah 7.4 lipo
- Wheelie bar.

Padeltires will be ordred soon
The car is real fun to drive, and i havnt had any prob with my tranny. But everything that´s mounted on this car, like the ESC,Rx etc makes the CG way to high, but that is a later Q.

I have now Stretched the car 20mm total,maybe that can help me when im FOFFing

The car (before stretch)



Now it is time to get some done...





stock upper link place



Streched

diff length, "upper link" moved out 10mm



Done..