|
#1
|
||||
|
||||
voltage question
looking to buy a futaba 4pls with R304SB Receiver in 1/5 scale.
The R304SB Receiver state a operating range of 4.8-7.4v would I need a Bec or can the receiver work with a 2s lipo without frying it.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
#2
|
|||
|
|||
Get an life 2s instead. IIRC they are 6.8 fully charged. (I rarely charge mine, so can't remember exactly!)
|
#3
|
||||
|
||||
I don't think 6.8v would give enough power to the 4 heavy duty servo's.
The receiver states 7.4v as max which is basic 2s lipo but they always charge higher than that and I don't know if that's taken into account.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
#4
|
|||
|
|||
http://www.rcgroups.com/forums/showthread.php?t=2014766
Looks like its in the manual........... And i've just checked, LiPo will be fine. http://www.futaba-rc.com/downloads/manuals.html |
#5
|
|||
|
|||
A LiFe 2 cell battery is a nominal 6.6V but charges to 7.2V.
|
|
|