|
#1
|
|||
|
|||
ADV. Now available for your favorite Yokomo!
Thanks to ORB Racing you can now get these Mr. ED designed suspension arms for your favorite Works Dogfighter.
Features:
Pricing and order info:
Orders and shipping cost inquiries are made directly with ORB Racing : orbracing@gmail.com Your parts will be printed on order: currently there is no stock. So, ask for the expecte time of delivery to avoid unpleasant surprises More pic's: Front end There's a tad of play ; back and forth where the arms meet with the bulkheads. I will leave that in though as the plastic bulkheads I used to test the first prototype were a tight fit. Now they fit both plastic and alu (or magnesium?) bulkheads. And one could still shim if needed. Rear end with fixed wheelbase: middle Bottomview: symmetrical arms, so if you have spares they'll fit whichever side you manage to break. Mount point for the rear and front stabilizers are included (NOT pre-threaded) Detail showing the texture and finish of the 3D prints |
#2
|
||||
|
||||
Are these suitable for racing or just displayed, I have 91 works needing wishbones
regards dave |
#3
|
|||
|
|||
Yes they are good for racing.
If they were just copies of the originals, they'd be slightly weaker due to the different production proces. That's why this design is a little bulkier and received extra ribs. |
|
|