|
|
#1
|
|||
|
|||
410 Djoints
Hi
Whos bought th d joint driveshaft set for the 410 and what do you think to them compared to the std ones are they worth the money ? |
#2
|
||||
|
||||
They seem good to me, the drive train seems to run a lot more free on the bench this must help too keep stuff a little cooler, one bloke said tonight they make getting the driveshaft thro the hoop easier when removing the diff (not that's it's a great problem with stds)
If you need to replace your driveshafts as the originals are worn I would defo go for them |
#3
|
||||
|
||||
I fitted them and they certainly make things a bit more free rolling.
|
#4
|
|||
|
|||
The Car is alot smoother and spools up alot quicker as there is zero resistance on the drivetrain, I have been running them on polished floor and i would say that they cause an increase in accelaration without a doubt.
Well worth the money in my opinion Gareth |
#5
|
|||
|
|||
I've noticed the 2mm grub screw on the centre shaft doesn't come lose anymore because the vibration has disappeared due to the angle of the CVD is greatly reduced. It's also a lot quieter.
Well worth it. |
#6
|
||||
|
||||
so im jealous.... seem to be out of stock yet... any links as to where i can get it?.. thanks.
|
|
|